Local Codes; Product Identification; Unpacking - Procom BLUE FLAME MNSD100TBA Owner's Operation And Installation Manual

Install and use heater with care. Follow all
local codes. In the absence of local codes,
use the latest edition of The National Fuel
Gas Code, ANSI Z223.1/NFPA 54*.
*Available from:
American National Standards Institute, Inc.
25 West 43rd Street
New York, NY 10036
National Fire Protection Association, Inc.
1 Batterymarch Park
Quincy, MA 02269-9101
1. Remove heater from carton.
2. Remove all protective packaging applied
to heater for shipping
6

LOCAL CODES

PRODUCT IDENTIFICATION

Front
Panel
Figure 1 - Vent-Free Gas Heater

UNPACKING

www.usaprocom.com
State of Massachusetts: The installation
must be made by a licensed plumber or
gas fitter in the Commonwealth of Mas-
sachusetts.
Sellers of unvented propane or natural
gas-fired supplemental room heaters shall
provide to each purchaser a copy of 527
CMR 30 upon sale of the unit.
In the State of Massachusetts the gas
cock must be a T-handle type. The State
of Massachusetts requires that a flexible
appliance connector cannot exceed three
feet in length.
Ignitor
Control
Button
Knob
Burner
Heater Cabinet
3. Check heater for any shipping damage. If
heater is damaged, promptly inform dealer
where you bought heater.
Grill
200213-01C