Arrow ED108 Owner's Manual & Assembly Instructions page 25

Step 12
X25
1
Lift and fasten a right and left
gable, under angle at corner, to the
rear wall angle with screws.
Hint: On the rear gable, use a bolt
and nut at the overlapping rear wall
angle. On the front gable, leave out 2
screws closest to center gable leg.
2
Join the left and right gables
together with a gable brace using a
bolt in the bottom hole only .
3
Repeat Steps 1 & 2 for the door
track on the front of building, except
for the track supports, fasten as
shown.
STEP
● Parts Needed For ●
STEP
Track Supports 6228
3
Gables/Braces
1
Gable
6001
● ● ● ● ● Left Gable Assemblies (2)
● ● ● ● ● Right Gable Assemblies (2)
● ● ● ● ● 6635 Gable Brace (2)
STEP
2
6000
6635 Gable Brace
25