Arrow ED108 Owner's Manual & Assembly Instructions page 18

Step 5
G18
1
Assemble the four corners of the
floor frame using two screws at each
corner as shown. At the front corners
fasten bolts through
the bottom with nuts on top.
2
Measure the floor frame diago-
nally. When the diagonal measure-
ments are equal, the floor frame is
square.
NOTE
If using a wood platform or
concrete slab do not fasten the
floor frames to your base at this
time. You will anchor the
building after it is erected.
NOTE
If you have purchased a Floor
Frame Kit you need to
install it at this time.
The floor frame must be square
and level or holes will not align.
18
● Parts Needed For
Floor Frame
STEP
1
from
● ● ● ● ● Front Floor Assembly (1)
●
● ● ● ● ● Side Floor Assembly (2)
● ● ● ● ● Rear Floor Assembly (1)
RIGHT
REAR
9203
RIGHT
FRONT
When Diagonal Measurements
are Equal the Floor Frame
is Square.
Level
8936
9203
9367
STEP
2