Replacing The Headlight Auxiliary Bulb; Adjusting The Headlight Beam; Adjusting The Digital Clock - Yamaha YBR250 2007 Service Manual

ADJUSTING THE HEADLIGHT BEAM/

ADJUSTING THE DIGITAL CLOCK

2
TRIP
ODO
Km
1
SELECT RESET
2
REPLACING THE HEADLIGHT AUXILIARY
BULB
1. Remove:
• headlight bolts
• socket 1
1
2. Remove:
• auxiliary bulb 2
V V V V V
WARNING
Since the headlight bulb gets extremely hot, keep
flammable products and your hands away from
the bulb until it has cooled down.
3. Install:
• auxiliary bulb
ADJUSTING THE HEADLIGHT BEAM
1. Adjust:
• headlight beam (vertically)
a. Loosen the headlight side bolts 1
b. Move the optical block in one of the following
1
directions, to change the headlight beam.
Upward
Downward
ADJUSTING THE DIGITAL CLOCK
1. Adjust:
• digital clock 1
a. Press the keys "SELECT" 2 and "RESET" 3
simultaneously for 2 seconds or more.
b. When the hour digits start blinking, press
3
"RESET" 3 to set the hour.
c. Press "SELECT" 2 to fix the hour. The minutes
digits will blink.
d. Press "RESET" 3 to set the minutes.
e. Press "SELECT" 2 to fix the minutes.
3-51
CHK
ADJ
New
Headlight beam is raised
Headlight beam is lowered