Replacing The Headlight Bulb - Yamaha XT250 2024 Owner's Manual

Replacing the headlight bulb

This model is equipped with a halogen
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE

Do not touch the glass part of
the headlight bulb. Otherwise
the luminosity and the life of the
bulb may be adversely affected.

Thoroughly clean off any dirt,
oil, or fingerprints from the bulb
using a cloth moistened with al-
cohol or thinner.

Do not use a headlight bulb of a
wattage higher than specified.

Do not affix any type of tinted
film or stickers to the headlight
lens.
Periodic maintenance and adjustment
EAU23818
ECA26690
1. Do not touch the glass part of the bulb.
1. Remove cowling
page 7-9.)
2. Remove the headlight unit by re-
moving the bolts.
1. Bolt
3. Disconnect the headlight coupler,
and then remove the headlight
1. Headlight coupler
A. (See
2. Headlight bulb cover
1
1. Headlight bulb holder
7-34
bulb cover.
1
2
4. Remove the headlight bulb holder
by turning it counterclockwise, and
then remove the burnt-out bulb.
1
5. Place a new bulb into position, and
1
2
3
4
5
6
7
8
9
10
11
12