Chassis; Checking The Brake Fluid Level - Yamaha YBR250 2007 Service Manual

CHASSIS/CHECKING THE BRAKE FLUID LEVEL
a

CHASSIS

CHECKING THE BRAKE FLUID LEVEL

1. Stand the vehicle on a level surface.
NOTE:
• Place the vehicle on a suitable stand.
• Make sure the vehicle is upright.
2. Check:
• brake fluid level
Below the minimum mark level a
recommended brake fluid.
Recommended brake fluid
DOT 4
V V V V V
WARNING
• Use only the designated brake fluid. Other
brake fluids may cause piston seals to
deteriorate, and provoke leakage and poor
performance.
• Refill with the same brake fluid type that is
already in the system. Mixing brake fluids can
result in a harmful chemical reaction, leading
to a defective performance.
• When refilling, be careful not to drop any
water into the fluid reservoir. The water will
reduce significantly the brake fluid boiling
point, causing air bubbles.
CAUTION:
The brake fluid can damage painted surfaces and
plastic parts. Therefore, always clean any
dropped brake fluid immediately.
NOTE:
To ensure a correct reading of the brake fluid level,
make sure that the reservoir upper part be is at the
horizontal position.
3-27
CHK
ADJ
Add the
-->