Yamaha YBR250 2007 Service Manual page 196

1
4
2
1
5
REMOVING THE ENGINE
INSTALLING THE ENGINE
1. Install:
2
3
NOTE:
7
Do not fully tighten the bolts.
6
2. Tighten:
5-6
• front / upper brackets 1
• bolts (front brackets) 2
• bolts / nut (upper bracket) 3
• bolt / nut (upper front) 4
• bolt / nut (lower front) 5
• bolt / nut (lower rear) 6
• bolt / nut (upper rear) 7
• brackets bolts to chassis 2
Bracket bolts / nuts
30 N.m (3.0 kgf.m, 22 ft.lb)
• upper bracket mounting bolt / nut 3
Upper bracket mounting bolt / nut
65 N.m (6.5 kgf.m, 48 ft.lb)
• upper rear mounting bolt / nut 4
Upper rear mounting bolt / nut
65 N.m (6.5 kgf.m, 48 ft.lb)
• lower front mounting bolt / nut 5
Lower front mounting bolt / nut
65 N.m (6.5 kgf.m, 48 ft.lb)
• lower rear mounting bolt / nut 6
Lower rear mounting bolt / nut
65 N.m (6.5 kgf.m, 48 ft.lb)
• bolt / nut (upper rear) 7
Lower rear mounting bolt / nut
65 N.m (6.5 kgf.m, 48 ft.lb)
ENG