Replacing The Fuses; Replacing The Headlight Bulb - Yamaha XV250N1 2021 Owner's Manual

Replacing the fuses

1. Spare fuse
2. Signaling system fuse
3. Main fuse
4. Spare main fuse
The fuse box is located under the rider
seat. (See page 4-8.)
If a fuse is blown, replace it as follows.
1. Turn the main switch off and turn
off the electrical circuit in ques-
tion.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
EAU53044
age to the electrical system and
possibly a fire.
Specified fuses:
Main fuse:
20.0 A
1
Signaling system fuse:
2
10.0 A
3. Turn the main switch on and turn
3
4
on the electrical circuit in question
to check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
Periodic maintenance and adjustment
[EWA15132]
7-33

Replacing the headlight bulb

This model is equipped with a halogen
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
1. Do not touch the glass part of the bulb.
1. Remove the headlight unit by re-
moving the screws.
EAU70440
ECA10661
7