Yamaha YBR250 2007 Service Manual page 48

A When fastening the wire harness, of the front break
switch let a clearance at the shown area.
B Fasten the brake switch (front) and the handlebar
switch wire harness (RS) with a band. Place the
band end forward.
C Fasten the handlebar switch wire harness (LS) and
the clutch switch wire harness with a band. Place
the band end forward.
CABLE ROUTING
D Put inside the headlight box the wire harnesses of
E Pass the wireharness through the lower hole.
F
7
7
E
2-30
the instruments panel, ignition key, handlebar
switches (LS and RS) and the front turn indication
lights (left and right).
Route the meter lead wire through the headlight
bracket stay guide.
SPEC
D