nifty Heightrider SP HYBRID Series Operating/Safety Instructions Manual page 27

Base Levers
1
1 Operates Platform Levelling
2 Operates the Flyboom
3 Operates Telescoping
4 Operates the Link Booms
5 Operates the Upper Boom
6 Operates Swing
7 Operates Front Wheel Steer
4.2.2 OPERATION
ALWAYS ALLOW THE ENGINE TO WARM UP BEFORE OPERATING
ALL MODELS
1) Ensure all red emergency stops are out.
2) Turn key switch at ground control station to Ground (Single turn clockwise).
DIESEL ENGINE
3) COLD ENGINE: - press and hold the Diesel Glow symbol for 3-5 seconds, then press and hold
the Start symbol and the engine will fire.
4) WARM ENGINE: - press and hold the Start symbol and the engine will fire.
ALL MODELS
5) Push and hold green power button on the base control panel.
6) Select a function and operate the appropriate press button control in full accordance with the
manufacturers operating and safety manual. (Refer to Section 4.2.1)
English/USA – 11/13
Original instructions
2 3
Up for Backward **
Up for Up
Up for Out
Up for Up
Up for Up
Down for Left
Up for Right
Height Rider/SP Series
Operating & Safety Instructions
4 5
Down for Forward **
Down for Down
Down for In
Down for Down
Down for Down
Up for Right
Down for Left
6 7
25