Wiznet WizFi360 User Manual page 47

Saved in the Flash
AT+CIPDNS_CUR?
Commands
[+CIPDNS_CUR:<DNS server0>]
[+CIPDNS_CUR:<DNS server1>]
Response
OK
• <enable>˖
▶
Parameters ▶
•
<DNSserver0>˖optional parameter indicating the first DNS server;
• <DNSserver1>˖optional parameter indicating the second DNS serve
• For command: AT+CIPDNS_CUR=0 (disable to use user-defined DNS servers),
"208.67.222.222" will be used as DNS server by default. And the DNS server
may change according to the configuration of the router which the chip
connected to.
Note
•
For command: AT+CIPDNS_CUR=1 (enable to use user-defined DNS servers,
but the <DNS server> parameters are not set), servers "208.67.222.222" will
be used as DNS server by default.
AT+CIPDNS_CUR=1ˈ"8.8.8.8"
Example
10.3.2.18. AT+CIPDNS_DEF
Saved in the Flash
AT+CIPDNS_DEF?
Commands
[+CIPDNS_DEF:<DNS server0>]
[+CIPDNS_DEF:<DNS server1>]
Response
OK
• <enable>˖
▶
Parameters ▶
• <DNSserver0>˖optional parameter indicating the first DNS server;
•
<DNSserver1>˖optional parameter indicating the second DNS serve.
• For command: AT+CIPDNS_DEF=0 (disable to use user-defined DNS servers),
"208.67.222.222" will be used as DNS server by default. And the DNS server
may change according to the configuration of the router which the chip
connected to.
Note
• For command: AT+CIPDNS_DEF=1 (enable to use user-defined DNS servers,
but the <DNS server> parameters are not set), servers "208.67.222.222"
be used as DNS server by default.
WizFi360 User Manual
0˖disable to use user-defined DNS servers;
1˖enable to use user-defined DNS servers
Sets User-defined DNS Servers; Configuration
0˖disable to use a user-defined DNS server;
1˖enable to use a user-defined DNS server.
AT+CIPDNS_CUR=<enable>[,<DNS
server0>ˈ<DNS server1>]
OK
AT+CIPDNS_DEF=<enable>[,<DNS
server0>ˈ<DNS server1>]
OK
will