At+Cwlif Ip Of Stations To Which The Wizfi360 Softap Is Connected - Wiznet WizFi360 User Manual

▶
▶
AT+CWSAP_CUR="WIZnet","wiznet2018",5,3
Example
10.2.2.11. AT+CWSAP_DEF Configures the WizFi360 SoftAP; Configuration
Saved in the Flash Flash
AT+CWSAP_DEF?
Commands
+CWSAP_DEF=<ssid>,<pwd>,<chl>,
Response
<ecn>[,<max conn>][,<ssid hidden>]
• <ssid>: string parameter, SSID of AP
•
<pwd>: string parameter, length of
• password: 8 ~ 64 bytes ASCII.
• <ch1>: channel ID.
• <ecn>: encryption method
▶
Parameters ▶
▶
• [<max conn>]( optional˅˖maximum number of Stations to which WizFi360
SoftAP can be connected; within the range of [1, 4].
• [<ssid hidden>]( optional˅˖
▶
▶
AT+CWSAP_DEF="WIZnet","wiznet2018",5,3
Example
10.2.2.12. AT+CWLIF
Connected
AT+CWLIF
Command
+CWLIF:<ip addr>,<mac>
Response
OK
• <ip addr>˖IP address of Stations to which WizFi360 SoftAP is connected.
Parameters
•
<mac>˖MAC address of Stations to which WizFi360 SoftAP is connected
• This command cannot get a static IP. It only works when both DHCPs of the
Note
WizFi360 SoftAP, and of the Station to which WizFi360 is connected, are
WizFi360 User Manual
0: SSID is broadcasted. (the defaultsetting)
1: SSID is not broadcasted
0: OPEN
2:WPA_PSK
3:WPA2_PSK
0: SSID is broadcasted. (the defaultsetting)
1: SSID is not broadcasted
IP of Stations to Which the WizFi360 SoftAP is
+CWSAP_DEF:<ssid>,<pwd>,<chl>,
<ecn>,<max conn>,<ssid hidden>
OK
or
ERROR