At+Cwlap Lists Available Aps; At+Cwsap Configures The Wizfi360 Softap - Wiznet WizFi360 User Manual

ERROR
• <sort_enab1e>˖determines whether the result of command AT+CWLAP will be
listed according to RSSI:
• <mask>˖determines the parameters shown in the result of AT+CWLAP; 0
means not showing the parameter corresponding to the bit, and 1 means
Parameters
showing it.
▶
▶
▶
▶
▶
AT+CWLAPOPT=1,31
Example

10.2.2.8. AT+CWLAP Lists Available APs

AT+CWLAP=<ssid>
Commands
+CWLAP:<ecn>,<ssid>,<rssi>,<mac>
,<channel>
OK
Response
or
ERROR
• <ecn>˖encryption method
Parameters
•
<ssid>˖string parameter, SSID of the AP
• <rssi>˖signal strength
•
<mac>˖string parameter, MAC address of the AP.
• <channel>˖channel number
AT+CWLAP
Examples

10.2.2.9. AT+CWSAP Configures the WizFi360 SoftAP

AT+CWSAP?
Commands
WizFi360 User Manual
bit 0˖determines whether <ecn> will be shown in the result of AT+CWLAP.
bit 1˖determines whether <ssid> will be shown in the result of AT+CWLAP.
bit 2˖determines whether <rssi> will be shown in the result of AT+CWLAP.
bit 3˖determines whether <mac> will be shown in the result of AT+CWLAP.
bit 4˖determines whether <ch> will be shown in the result of AT+CWLAP.
0˖OPEN
▶
1˖WEP
▶
2˖WPA_PSK
▶
3˖WPA2_PSK
▶
4˖WPA_WPA2_PSK
▶
AT+CWLAP
+CWLAP:<ecn>,<ssid>,<rssi>,<mac>
,<channel>
OK
AT+CWSAP=<ssid>,<pwd>,
<chl>,<ecn>[,<max conn>][,<ssid