Command Description - Wiznet WizFi360 User Manual

10. Command Description

Each command set contains four types of AT commands
Type
Test Command AT+<x>=?
Query Command AT+<x>?
Set Command AT+<x>=<...>
Execute Command AT+<x>
Notice:
•
Not all AT commands support all four variations mentioned above.
• Square brackets [ ] designate the default value; it is either not required or may not appear.
• String values need to be included in double quotation marks, for example:AT+CWSAP=
"WizFi360", "WizFi360",1,4.
• The default baud rate is 115200
•
AT commands have to be capitalized, and must end with a new line (CR LF).
WizFi360 User Manual
Command Format Description
Queries the Set Commands' internal parameters and
their range of values.
Returns the current value of parameters.
Sets the value of user-defined parameters in commands,
and runs these commands.
Runs commands with no user-defined parameters.