Table of Contents
Advertisement
Thermo Scientific
Temperature Menu
Orion Star A220 series portable meters offer a Temperature menu used to customize
temperature settings for each channel by manually entering a temperature value, selecting the
temperature units as °C or °F and performing a temperature calibration on an ATC probe,
conductivity sensor or dissolved oxygen sensor with built-in temperature.
Meter Model
Channel
Star A221 pH Meter
pH Channel
Star A222
COND
Conductivity Meter
Channel
Star A223
DO/RDO
RDO/DO Meter
Channel
Manual Temperature Value
1. In the measurement mode, press the setup key.
2. Press the p, q, t or u key to highlight pH Channel or COND Channel and press the
f3 (select) key.
3. Press the p or q key to highlight Temperature and press the f3 (select) key.
4. Press the p or q key to highlight Manual Temp Value and press the f3 (select) key.
5. Press the f3 (edit) key access the popup number entry screen and enter the sample
temperature value.
a. Press the p, q, t or u key to highlight a number, decimal point
or negative sign and then press the f3 (enter) key to select the
highlighted item. Repeat until the sample temperature value is
shown at the top of the screen.
b. Press the f2 (done) key to save the value and exit the number
entry screen.
6. Press the f1 (back) key to return to the main temperature menu and press the measure
(esc) key to return to the measurement mode.
Temperature Menu
· Manual Temp Value
· Temperature Unit
· Temperature Calibration
· Manual Temp Value
· Temperature Unit
· Temperature Calibration
· Temperature Unit
· Temperature Calibration
(polarographic DO sensor only)
Orion Star A220 Series Portable Meter User Manual
Chapter 3
Meter Setup Menus
|
Menu Options
Enter temperature value
· Celsius
· Fahrenheit
· ATC
Enter temperature value
· Celsius
· Fahrenheit
· ATC
· Celsius
· Fahrenheit
· Solution Temperature
· Membrane Temperature
· Sol & Mem Temp
0
1
2
.
3
4
5
6
7
8
9
–
backspace
back
done
enter
29
|
Advertisement
Table of Contents
