Changing The Probe Settings - Renishaw OLP40 Quick Start Manual

Changing the probe settings

Key to the symbols
LED short flash
LED long flash
Deflect the stylus for less than 4 seconds
to move to the next menu option.
Deflect the stylus for more than
4 seconds to move to the next menu.
To exit, leave the stylus untouched for
more than 20 seconds.
CAUTION: Do not remove the batteries whilst in configuration mode.
To exit, leave the stylus untouched for more than 20 seconds.
3
2
> 5 s
1
LED check
Deflect the stylus and hold it deflected
until after the battery status has been
displayed at the end of the review
Battery status
Battery good
or

sequence.
Battery low
13