Table of Contents
Advertisement
3. Installation and Configuration
This chapter provides specific hardware and firmware installation and configuration steps.
Hardware Installation
This section provides information on installing drives and replacing memory modules.
Drive Installation
The HS-453DX is compatible with 3.5-inch and 2.5-inch hard drives, 2.5-inch solid-state drives, and M.2
solid-state drives.
Installing 3.5-inch Drives on 3.5-inch Trays
Warning
• Installing a drive deletes all data on the drive.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1. Remove the front cover.
2. Power off the NAS.
3. Remove a drive tray by simultaneously pressing the latch and pulling the tray.
HS-453DX User Guide
Installation and Configuration
12
Advertisement
Table of Contents
