Product Overview; About The Hs-453Dx; Hardware Specifications - QNAP HS-453DX User Manual

Hide thumbs Also See for HS-453DX:
Table of Contents

Advertisement

2. Product Overview

This chapter provices basic information about the QNAP HS-453DX NAS.

About the HS-453DX

The HS-453DX is a four-drive silent NAS powered by an Intel
®
processor or an Intel
Celeron
of DDR4 memory. In addition to its two front drive bays, the HS-453DX has two internal M.2 SATA SSD slots
for added data management capability. The HS-453DX features both a Gigabit and 10 Gigabit Ethernet port
for enhanced connectivity as well as two HDMI ports for additional multimedia support.

Hardware Specifications

Warning
• If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third-party
invalidates the warranty.
• QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
• For details, see the
Tip
Model specifications are subject to change without prior notice. To see the latest
specifications, go to https://www.qnap.com.
Component
Ordering Information
Ordering P/N
Processor
CPU
Frequency
Architecture
Encryption engine
Memory
Pre-installed memory
®
J4105 quad-core 1.5 GHz processor and comes equipped with up to 8 GB
QNAP Warranty Terms and
• HS-453DX-4G
• HS-453DX-8G
®
Intel
Celeron
®
Intel
Celeron
4-core/4-thread 1.8 GHz base/2.5 GHz burst
4-core/4-thread 1.5 GHz base/2.5 GHz burst
x86 64-bit
AES-NI
• 4 GB RAM: 2 x 2 GB SODIMM DDR4
• 8 GB RAM: 2 x 4 GB SODIMM DDR4
®
®
Celeron
J4115 quad-core 1.8 GHz
Conditions.
HS-453DX
®
J4115
®
J4105
HS-453DX User Guide
Product Overview
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hs-453dx seriesHs-453dx-4gHs-453dx-8g

Table of Contents