Download
Share
Print this page
QNAP TS- 62 Series User Manual
  1. Manuals
  2. Brands
  3. QNAP Manuals
  4. Storage
  5. TS- 62 Series
  6. User manual

QNAP TS- 62 Series User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Document Version: 5
09/12/2022
TS-x62, TS-x64
TS-262
TS-462
TS-264
TS-464
TS-664
User Guide

Advertisement

loading

Related Manuals for QNAP TS- 62 Series

Summary of Contents for QNAP TS- 62 Series

  • Page 1 TS-x62, TS-x64 TS-262 TS-462 TS-264 TS-464 TS-664 User Guide Document Version: 5 09/12/2022...
  • Page 2 TS-x62, TS-x64 User Guide Contents 1. Product Overview About the TS-x62 and TS-x64............................3 Hardware specifications............................3 Package contents...............................6 Components................................7 Front panel................................7 Rear panel................................9 System board...............................13 Front drive numbering............................14 Network port numbering........................... 15 USB port numbering............................16 Safety information..............................17 Installation requirements............................
  • Page 3 71 myQNAPcloud Link..............................71 Qfinder Pro................................71 QNAP ID..................................71 QTS.....................................71 7. Notices Limited warranty..............................72 Disclaimer................................. 72 Copyright and trademarks............................72 GNU Public License..............................73 CE notice................................... 80 UKCA notice................................80 FCC notice................................. 80 VCCI notice................................81 BSMI notice................................81 SJ/T 11364-2006................................82...
  • Page 4 This chapter provides basic information about the QNAP device. About the TS-x62 and TS-x64 The TS-x62 and TS-x64 QNAP NAS series include hardware optimized for dedicated backup jobs, AI-driven applications, multimedia streaming, and VPN services. The Intel® Celeron® CPU includes an integrated GPU which offers an HDMI resolution of up to 4K at 60 Hz, and boosts the performance of AI-driven applications such as QuMagie and DA Drive Analyzer.
  • Page 5 Drive compatibility • 3.5-inch SATA hard disk drives • 2.5-inch SATA solid-state drives Note You can purchase tray bases from QNAP or an authorized reseller. For details, go to https://shop.qnap.com/. M.2 SSD slots 2 x M.2 2280 PCIe Gen 3 x1 M.2 SSD form factor 2280...
  • Page 6 • Rear: 2 x USB 3.2 Gen 1 Type-A PCIe slots 1 x PCIe 3.0 x2 For the list of compatible drive models and expansion cards, go to https://www.qnap.com/compatibility. HDMI ports 1 x HDMI 2.0 (up to 4096 x 2160 resolution at 60 Hz) Interface Buttons •...
  • Page 7 • Non-condensing relative humidity: 5% to 95% • Wet-bulb temperature: 27˚C (80.6˚F) Security slot Kensington security slot Model specifications are subject to change without prior notice. To see the latest specifications, go to https://www.qnap.com. Package contents Item Quantity TS-x62/TS-x64 Product Overview...
  • Page 8 TS-x62, TS-x64 User Guide Item Quantity Drive trays • TS-262, TS-264: 2 • TS-464, TS-462: 4 • TS-664: 6 Screws for 2.5-inch drives • TS-262, TS-264: 8 • TS-464, TS-462: 16 • TS-664: 24 Screws for 3.5-inch drives • TS-262, TS-264: 8 •...
  • Page 9 TS-x62, TS-x64 User Guide Component Component Status LED Drive 2 LED LAN LED USB 3.2 Gen 2 One Touch Copy Type-A port USB LED USB One Touch Copy button TS-462, TS-464 Component Component Power button Drive 2 LED Status LED Drive 3 LED LAN LED Drive 4 LED...
  • Page 10 TS-x62, TS-x64 User Guide TS-664 Component Component Power button Drive 3 LED Status LED Drive 4 LED LAN LED Drive 5 LED USB LED Drive 6 LED Drive 1 LED USB 3.2 Gen 2 One Touch Copy Type-A port Drive 2 LED USB One Touch Copy button Rear panel TS-262...
  • Page 11 TS-x62, TS-x64 User Guide Component Component PCIe low-profile cover 2.5 Gigabit Ethernet port (RJ45) Reset button 2.5 Gigabit Ethernet speed LED USB 3.2 Gen 2 Type-A port Power input USB 3.2 Gen 1 Type-A ports Kensington security slot HDMI 2.0 port System fan 2.5 Gigabit Ethernet activity LED TS-264...
  • Page 12 TS-x62, TS-x64 User Guide TS-462 Component Component PCIe low-profile cover 2.5 Gigabit Ethernet activity LED Reset button Power input USB 3.2 Gen 2 Type-A port 2.5 Gigabit Ethernet speed LED USB 3.2 Gen 1 Type-A ports System fan HDMI 2.0 port Kensington security slot 2.5 Gigabit Ethernet port (RJ45) TS-464...
  • Page 13 TS-x62, TS-x64 User Guide Component Component PCIe low-profile cover 2.5 Gigabit Ethernet activity LED Reset button Power input USB 3.2 Gen 2 Type-A port 2.5 Gigabit Ethernet speed LED USB 3.2 Gen 1 Type-A ports System fan HDMI 2.0 port Kensington security slot 2.5 Gigabit Ethernet ports (RJ45) TS-664...
  • Page 14 TS-x62, TS-x64 User Guide System board TS-262, TS-264 Note This image does not include the chassis. Component Component PCIe slot (PCIe Gen 3.0 x 2) M.2 SSD slot 2 M.2 SSD slot 1 TS-462, TS-464, TS-664 Product Overview...
  • Page 15 TS-x62, TS-x64 User Guide Note This image does not include the chassis. Component Component PCIe slot (PCIe Gen 3.0 x 2) M.2 SSD slot 1 Memory slot 1 M.2 SSD slot 2 Memory slot 2 Front drive numbering TS-262, TS-264 TS-462, TS-464 Product Overview...
  • Page 16 TS-x62, TS-x64 User Guide TS-664 Network port numbering TS-x62 Product Overview...
  • Page 17 TS-x62, TS-x64 User Guide TS-x64 USB port numbering Front USB Ports Product Overview...
  • Page 18 TS-x62, TS-x64 User Guide Rear USB Ports Safety information The following instructions help ensure personal safety and environmental safety. Read these instructions carefully before performing any operation. General Instructions • The device should be stored in a secure location with restricted access, controlled through the use of a tool, lock and key, or any means of security.
  • Page 19 Hardware and peripherals • Storage drives For the list of compatible drive models, go to https:// www.qnap.com/compatibility. • Network cable Tools • Flat head screwdriver • Anti-static wrist strap Setting up the NAS...
  • Page 20 TS-x62, TS-x64 User Guide For details, see the following topics: • Installing 2.5-inch drives on 3.5-inch trays • Installing 3.5-inch hard drives on 3.5-inch trays • Installing M.2 solid-state drives 3. Optional: Connect expansion units. For details, see Expansion unit installation.
  • Page 21 TS-x62, TS-x64 User Guide 2. Installation and Configuration This chapter provides specific hardware and firmware installation and configuration steps. Hardware installation This section provides information on installing drives, replacing memory modules, installing expansion cards, and connecting expansion units. Drive installation The NAS is compatible with 3.5-inch hard drives, 2.5-inch solid-state drives, and M.2 solid-state drives.
  • Page 22 TS-x62, TS-x64 User Guide c. Slide the front cover to the left and then pull. 3. Remove the drive tray. a. Remove a drive tray by simultaneously pressing the latch and pulling the tray. 4. Install a drive on the tray. Installation and Configuration...
  • Page 23 TS-x62, TS-x64 User Guide a. Place the drive on the tray so that the holes on the bottom of the drive are aligned with the holes on the bottom of the tray. b. Attach the screws. 5. Insert the tray into the bay. 6.
  • Page 24 TS-x62, TS-x64 User Guide b. Slide the lock down to secure the front cover. 7. Power on the NAS. Installing 3.5-inch hard drives on 3.5-inch trays Warning • Installing a drive deletes all data on the drive. • Installation and Configuration...
  • Page 25 TS-x62, TS-x64 User Guide Moving fan blades: Keep your hands and other body parts away from moving fan blades. • Observe electrostatic discharge (ESD) procedures to avoid damage to components. 1. Power off the NAS. 2. Remove the front cover. a.
  • Page 26 TS-x62, TS-x64 User Guide 3. Remove the drive tray. a. Remove a drive tray by simultaneously pressing the latch and pulling the tray. 4. Install a drive on the tray. a. Remove the fastening panels from the sides of the drive tray. Installation and Configuration...
  • Page 27 TS-x62, TS-x64 User Guide b. Place the drive on the tray so that the holes on the bottom of the drive are aligned with the holes on the bottom of the tray. c. Attach the fastening panels to lock the drive to the tray. d.
  • Page 28 TS-x62, TS-x64 User Guide 5. Insert the tray into the bay. 6. Attach the front cover. a. Align the front cover with the grooves on the case and then slide to the right. Installation and Configuration...
  • Page 29 TS-x62, TS-x64 User Guide b. Slide the lock down to secure the front cover. 7. Power on the NAS. Installing M.2 solid-state drives Warning • Only qualified personnel should perform the following steps. Failure to follow instructions can result in serious injury or death. •...
  • Page 30 • QNAP recommends installing heatsinks on the M.2 SSD controllers to enhance cooling efficiency and to ensure consistent performance. • Before installing non-QNAP heatsinks, ensure that they are of the appropriate size and shape. • Heatsinks are not included with the NAS and must be purchased separately. For details, contact an authorized reseller or go to https://shop.qnap.com/.
  • Page 31 TS-x62, TS-x64 User Guide c. Slide the front cover to the left and then pull. 5. Remove each drive tray. a. Remove a drive tray by simultaneously pressing the latch and pulling the tray. Installation and Configuration...
  • Page 32 TS-x62, TS-x64 User Guide 6. Optional: Install a heatsink on the M.2 SSD. a. Locate the controller on the M.2 SSD. Note The controller location varies depending on the model and manufacturer of the M.2 SSD. For details, refer to the documentation or contact the manufacturer. b.
  • Page 33 TS-x62, TS-x64 User Guide 7. Install the M.2 SSD. Note The following installation images do not include the chassis. a. Unlock the M.2 spacer by pushing down on its edge. b. Insert the M.2 SSD into the slot. c. Carefully press the M.2 SSD down until the spacer locks the drive into place. Installation and Configuration...
  • Page 34 TS-x62, TS-x64 User Guide d. Verify that the M.2 spacer is firmly locking the M.2 SSD into place. 8. Optional: Install an additional M.2 SSD. 9. Slide each drive tray back into the NAS. Installation and Configuration...
  • Page 35 TS-x62, TS-x64 User Guide 10. Attach the front cover. a. Align the front cover with the grooves on the case and then slide to the right. b. Slide the lock down to secure the front cover. Installation and Configuration...
  • Page 36 The TS-462, TS-464-4G, and TS-664 have two memory slots. You can increase the memory capacity of the NAS by upgrading the memory modules. When using two modules, use only QNAP modules of the same type and capacity to maintain system performance and stability. You can purchase QNAP memory modules from authorized resellers.
  • Page 37 TS-x62, TS-x64 User Guide c. Slide the front cover to the left and then pull. 5. Remove each drive tray. a. Remove a drive tray by simultaneously pressing the latch and pulling the tray. Installation and Configuration...
  • Page 38 TS-x62, TS-x64 User Guide 6. Remove an existing module. Note The following installation images do not include the chassis. a. Push the retention clips outward simultaneously to release the module. b. Verify that the module has tilted upward and is completely released from the slot. Warning Attempting to remove a module that is not completely released may damage the module and the system board.
  • Page 39 TS-x62, TS-x64 User Guide d. Carefully slide the module out of the slot. Warning • Do not touch the internal components, particularly the metal connectors. • Do not bend the module. 7. Install a new module. a. Align the notch with the ridge in the slot. b.
  • Page 40 TS-x62, TS-x64 User Guide 8. Slide each drive tray back into the NAS. 9. Attach the front cover. a. Align the front cover with the grooves on the case and then slide to the right. b. Slide the lock down to secure the front cover. Installation and Configuration...
  • Page 41 Go to Control Panel > System > System Status > Hardware Information . c. Check the value for Total memory. Installing expansion cards The NAS supports selected expansion cards. QNAP-branded expansion cards purchased from the company website are shipped with the brackets necessary to fit this NAS. Warning •...
  • Page 42 TS-x62, TS-x64 User Guide Other moving components: Keep your hands and other body parts away from other moving components. 1. Power off the device. 2. Disconnect the power cord from the electrical outlet. 3. Disconnect all cables and external attachments. 4.
  • Page 43 TS-x62, TS-x64 User Guide 5. Remove the case cover. a. Remove the screws that secure the case cover to the chassis. b. Slide the case cover back. c. Slide the case cover to the left to detach it from the chassis. Installation and Configuration...
  • Page 44 TS-x62, TS-x64 User Guide 6. Remove the PCIe cover. a. Remove the screw that secures the cover to the bracket. b. Pull the cover away from the slot. 7. Optional: Attach the full-height bracket to the expansion card. a. Remove all screws of the existing bracket. Installation and Configuration...
  • Page 45 TS-x62, TS-x64 User Guide b. Carefully pull the bracket away from the card. c. Attach the full-height bracket to the card using the same screws. d. Verify that the bracket does not move. 8. Install the expansion card. a. Hold the card by the edges. b.
  • Page 46 TS-x62, TS-x64 User Guide 9. Attach the case cover. a. Place the case cover on the NAS. b. Slide the case cover to the left. c. Slide the case cover to the front to secure it to the chassis. d. Attach the screws to the back of the NAS. Installation and Configuration...
  • Page 47 TS-x62, TS-x64 User Guide 10. Attach the front cover. a. Align the front cover with the grooves on the case and then slide to the right. b. Slide the lock down to secure the front cover. Installation and Configuration...
  • Page 48 Expansion unit installation The NAS supports SATA and USB expansion units. For details, see the table below. You can purchase storage expansion accessories from QNAP or an authorized reseller. For details, go to https://shop.qnap.com/. For the list of compatible expansion units and the maximum number of applicable expansion units, go to https://www.qnap.com/go/compatibility-expansion.
  • Page 49 TS-x62, TS-x64 User Guide Expansion Unit Description Required Accessories Model TL-D400S • Uses a SATA 6 Gbps (SFF-8088) • 1 x SFF-8088 connector cable interface • QXP-400eS-A1164 host bus adapter • Supports SATA HDD/SSD TL-D800S • Uses a SATA 6 Gbps (SFF-8088) •...
  • Page 50 Note The QNAP QXP host bus adapter is required for connecting the SATA JBOD enclosure to a host device. Third-party host bus adapters are not compatible with QNAP JBOD enclosures. 3. Connect the expansion unit to the NAS using the following topology.
  • Page 51 Go to Main Menu > Storage & Snapshots > Overview > System . c. Verify that the expansion unit is listed. QTS installation The NAS uses the QNAP QTS operating system. You can install QTS using any of the following methods. Method Description...
  • Page 52 HDMI connection. Initializing QTS using Qfinder Pro You can initialize QTS using Qfinder Pro, which is an utility designed to help you locate and manage QNAP devices on your network. Warning Initializing QTS deletes all data on the drives. Back up your data before proceeding.
  • Page 53 TS-x62, TS-x64 User Guide 6. Close the warranty page. The Smart Installation Guide opens in the default web browser. 7. If the screen shows a different operating system, click QTS. Note This step is only required if the NAS supports installing more than one operating system and the default operating system for installation is not QTS.
  • Page 54 TS-x62, TS-x64 User Guide 13. Specify the time zone, date, and time using any of the following methods: QNAP recommends connecting to an NTP server to ensure that the NAS follows the Coordinated Universal Time (UTC) standard. Methods User Actions...
  • Page 55 QTS is initialized. Initializing QTS using the cloud installation website You can initialize QTS on the cloud installation website, which is designed to help you set up QNAP devices. Warning Initializing QTS deletes all data on the drives. Back up your data before proceeding.
  • Page 56 NAS after initialization. You can enable it by connecting to QTS through LAN and then installing myQNAPcloud Link. 7. Click Next. The QNAP Warranty Service page opens in the default web browser. 8. Click Check warranty. The QNAP Warranty Service window opens in a new web page.
  • Page 57 The Set the date and time screen appears. 16. Specify the time zone, date, and time using any of the following methods: QNAP recommends connecting to an NTP server to ensure that the NAS follows the Coordinated Universal Time (UTC) standard.
  • Page 58 Initializing QTS deletes all data on the drives. Back up your data before proceeding. 1. Connect an HDMI display to the NAS. 2. Connect a USB keyboard to the NAS or prepare the QNAP IR remote control (not available on all models).
  • Page 59 TS-x62, TS-x64 User Guide 4. Select Start Smart Installation Guide. The Enter the NAS name and administrator’s password screen appears. 5. Specify the following information: • NAS Name: Specify a name with 1 to 14 characters. The name can contain letters (A to Z, a to z), numbers (0 to 9), and hyphens (-), but cannot end with a hyphen.
  • Page 60 TS-x62, TS-x64 User Guide 3. Basic Operations This chapter describes basic NAS operations. Power button Operation User Action Result Power on Press the button once. The device powers on. Power off Press and hold the button for 1.5 The device powers off. seconds.
  • Page 61 This feature supports incremental backups. The NAS only copies files that were modified or added after the last backup. To configure the behavior of the button when an external device is connected to the button's USB port, install and use Hybrid Backup Sync on your QNAP operating system. For details, see the Hybrid Backup Sync documentation.
  • Page 62 TS-x62, TS-x64 User Guide Status Description • All drives are in standby mode. • The device is powered off. Drive LED Status Description Flashes red Data is being accessed, and during the process a drive read/write error occurred. A drive read/write error occurred. Flashes green Data is being accessed.
  • Page 63 TS-x62, TS-x64 User Guide Status Description The NAS has finished copying data to or from the USB device connected to the front USB port. Audio alerts Duration Frequency Description Short beep (0.5 seconds) • The NAS is starting up. • When the reset button is pressed for 3 seconds, the NAS resets configurations.
  • Page 64 NAS migration requirements You can only migrate drives to specific NAS models, depending on your source NAS. For the list of NAS models compatible with direct NAS migration, see https://www.qnap.com/go/nas-migration. Your device must meet the following requirements: • QTS NAS supports several types of NAS migration: •...
  • Page 65 1. Power off the source NAS and the destination NAS. 2. Remove the drives. Important QNAP recommends following the source NAS drive order when installing the drives. Take note of the drive tray order when removing the drives. a. Remove the drives from the source NAS.
  • Page 66 TS-x62, TS-x64 User Guide b. Remove the drive trays from the destination NAS. 3. Install the drives. a. Install source NAS drives onto the destination NAS drive trays. b. Insert the drive trays into the destination NAS. 4. Power on the destination NAS. 5.
  • Page 67 TS-x62, TS-x64 User Guide Setting Description Password Specify a password that contains 1 to 16 characters from any of the following groups: • Letters: A to Z, a to z • Numbers: 0 to 9 • Special characters: . - _ ~ ! @ # $ % ^ & ( ) { } •...
  • Page 68 TS-x62, TS-x64 User Guide 10. Select the paired folders. Important • All subfolders and files in the selected folder are selected. • You can only sync up to 16 paired folders per job. a. Under the source, click A dialog box opens. b.
  • Page 69 TS-x62, TS-x64 User Guide d. Select Export user and user group settings. e. Click Next. The NAS user and user group settings are exported as a file and downloaded onto your computer. 3. Import user settings on the source NAS to the destination NAS. a.
  • Page 70 TS-x62, TS-x64 User Guide 5. Troubleshooting This chapter describes basic troubleshooting information. Forcing Qfinder Pro or myQNAPcloud to locate the NAS If Qfinder Pro or myQNAPcloud is unable to locate the NAS during QTS installation, the drives or data may be faulty.
  • Page 71 ≥ 4 (Must be an even RAID 10 One disk per subgroup fails. number) ≥ 6 RAID 50 One disk per subgroup fails. Support and other resources QNAP provides the following resources: Resource Documentation https://download.qnap.com Compatibility List https://www.qnap.com/compatibility NAS Migration Compatibility https://www.qnap.com/go/nas-migration Expansion Unit Compatibility https://www.qnap.com/go/compatibility-expansion...
  • Page 72 Enables you to access QNAP devices over the internet without configuring complex port forwarding settings Qfinder Pro QNAP utility that lets you locate and access QNAP NAS devices in your local area network QNAP ID User account that enables you to use myQNAPcloud remote access and other QNAP services...
  • Page 73 No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. Except as provided in QNAP's terms and conditions of sale for such products, QNAP assumes no liability whatsoever, and QNAP disclaims any express or implied warranty, relating to sale and/or use of QNAP products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right.
  • Page 74 TS-x62, TS-x64 User Guide Other company names and products mentioned herein are trademarks or registered trademarks of their respective holders. GNU Public License Version 3, 29 June 2007 Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
  • Page 75 TS-x62, TS-x64 User Guide “Copyright” also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. “The Program” refers to any copyrightable work licensed under this License. Each licensee is addressed as “you”. “Licensees” and “recipients” may be individuals or organizations. To “modify”...
  • Page 76 TS-x62, TS-x64 User Guide for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. Conveying under any other circumstances is permitted solely under the conditions stated below.
  • Page 77 TS-x62, TS-x64 User Guide a. Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange. b. Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in...
  • Page 78 TS-x62, TS-x64 User Guide Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying.
  • Page 79 TS-x62, TS-x64 User Guide your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice.
  • Page 80 TS-x62, TS-x64 User Guide have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient's use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered...
  • Page 81 TS-x62, TS-x64 User Guide PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
  • Page 82 • Consult the dealer or an experienced radio/television technician for help. Important Any modifications made to this device that are not approved by QNAP Systems, Inc. may void the authority granted to the user by the FCC to operate this equipment.
  • Page 83 TS-x62, TS-x64 User Guide SJ/T 11364-2006 本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可能 包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体 显示 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 0 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出...

This manual is also suitable for:

Ts- 64 seriesTs-262Ts-462Ts-264Ts-464Ts-664