Table of Contents
Advertisement
•
Devices with redundant power supply may have one or more power supply unit (PSU) cords. To avoid
serious injuries, a trained service technician must disconnect all PSU cords from the device before
installing or replacing system components.
System Battery
• To avoid potential battery explosion, causing injury or damage to components, ensure that you replace
the existing battery with a battery of the same type.
• Dispose of used batteries properly according to local regulations or the instructions of the battery
manufacturer.
Moving Parts
•
Moving fan blades: Keep your body parts away from moving fan blades while the device is connected
to a power source.
•
Moving components: Keep your body parts away from other moving components.
Installation Requirements
Category
Environment
Hardware and peripherals
Tools
Setting Up the NAS
Important
• Room temperature: 0˚C to 40˚C (32˚F to 104˚F)
• Non-condensing relative humidity: 5% to 95%
• Wet-bulb temperature: 27˚C (80.6˚F)
• Flat, anti-static surface without exposure to direct sunlight, liquids, or
chemicals
• Storage drives
For details on compatible drives, go to
compatibility/.
• Network cable
• Phillips #1 or #2 screwdriver
• Anti-static wrist strap
HS-453DX User Guide
Item
https://www.qnap.com/
Product Overview
10
Advertisement
Table of Contents
