Table of Contents
Advertisement
3. Installation and Configuration
This chapter provides specific hardware and firmware installation and configuration steps.
Hardware installation
This section provides information on installing or replacing drives, memory modules, expansion cards,
expansion units, redundant power supply units, fans, and rail kits.
Removing the case cover
Warning
• Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
•
Other moving components: Keep your hands and other body parts away from other
moving components.
1. Power off the device.
2. Disconnect the power cords from the electrical outlet.
3. Disconnect all cables and external attachments.
4. Loosen the screws that secure the top cover to the chassis.
TS-hx77AXU-RP User Guide
Installation and Configuration
14
Advertisement
Table of Contents
