Arrow Storage Products AR1012 C1 Owner's Manual & Assembly Manual page 37

Step 13: Continued
You will need for this page:
(QTY: 72)
(QTY: 20)
Continue to apply weather stripping.
12
Attach Roof Panels, one at a time, to Roof Beams using eight (8) screws per
Panel. Insert bolt and nut in middle hole where ribs overlap.
13
Attach Front Left and Right Roof Panels, one at a time, to Roof Beams using
eight (8) screws per Panel. Insert bolt and nut in middle hole where ribs overlap.
14
Secure Front Roof Panels to Gables using six (6) bolts and nuts per Gable.
15
Finish Weather Stripping the Roof and cut the tape just past the end of the Roof.
Fold end of tape under roof edge.
16 Attach Long Ridge Cap with four (4) bolts and nuts. DO NOT secure end of Ridge
Caps until Peak Caps are in place.
On both sides of the building, secure the bottom of Roof Panels to the Side Wall
17
Angles using four (4) screws per Panel.
9086
Front
DO NOT secure end of Ridge Caps
until Peak Caps are in place.
9087
Left Roof
Panel
7743
6869
9087
1 1
9086
Right Roof
Panel
7743
place. This will ease assembly. Bolts must be fully
tightened before moving on to the next page.
37
2
7743 6869
Roof Panel Ridge Cap
Back
DO NOT fully tighten Ridge Cap bolts
until you have both Ridge Cap bolts in
37BJ
1