Arrow Storage Products AR1012 C1 Owner's Manual & Assembly Manual page 25

Step 8: Continued
You will need for this page:
(QTY: 84)
2 Working one side at a time, lift the Panels into
place and secure top and bottom of Panels
with screws. Be sure to overlap ribs as shown
on the previous page.
3 Place a bolt and nut through the center hole
of the Panel everywhere Panels overlap, as
shown below.
Corner Panel
Corner Panels lay under Front and Side Panels.
(QTY: 13)
Attach Wall Panels with screws thru all holes in top and bottom of Panels.
Place bolt thru center hole where Panels overlap.
25
Use bolts to attach Wall Panels
where Rear Wall Angles overlap.
25AW