Arrow Storage Products AR1012 C1 Owner's Manual & Assembly Manual page 29

Step 11: Continued
You will need for this page:
(QTY: 14) (QTY: 3)
2 Working with one Gable at a time,
attach the Rear Gables to the Rear
Wall Angle with screws.
3
Insert two (2) bolts and nuts where
Wall Angles overlap.
4
To secure Gables together, position
the Gable Brace as shown and insert
a single bolt and nut through the
second hole from the bottom only.
Attach Brace with bolt thru
second hole from bottom only.
1
9009
Gable Brace
Gable must fi t UNDER Side Wall Angle at corner.
Use bolts where Angles overlap.
29
29BJ