Arrow Storage Products AR1012 C1 Owner's Manual & Assembly Manual page 32

Step 12: Continued
You will need for this page:
(QTY: 4)
3 In the front, attach the Roof Beam
Brace to the Track Support with
one (1) bolt and nut as shown and
rotate to align with Roof Beam. Secure to
Roof Beam with one (1) bolt and nut as
shown.
4 In the rear, attach the Roof Beam
Brace to the Gable with one (1) bolt
and nut as shown and rotate to align
with Roof Beam. Secure to Roof Beam with
one (1) bolt and nut as shown.
Tab end attaches to Roof Beam.
Angled end attaches to Gable.
Attach Brace to Gable then rotate to align with Roof Beam.
2
9204
Beam Brace
In Rear, attach Brace to lowest hole in Gable and Main Beam.
32
In Front, attach Brace to Track Supports and Main Beam.
33A