Arrow Storage Products AR1012 C1 Owner's Manual & Assembly Manual page 23

Step 7: Wall Framing
You will need for this page:
(QTY: 30)
1 • Install one Side Wall Angle Assembly fi rst.
• Install the Rear Wall Angle Assembly second.
• Install the other Side Wall Angle Assembly third.
• Install the Door Track Assembly last.
2 Use the number of screws shown. Leave the hole
closest to the Ramp open in each Front Panel as
shown above.
Wall Angles must face inside the building.
Side Wall Angle Assembly
Assemblies from Step 2 and Step 4:
• Rear Wall Angle Assembly (1)
• Side Wall Angle Assemblies (2)
• Door Track Assembly (1)
ATTACH FRAMES TO INSIDE OF WALL PANELS
Door Track Assembly
Leave these holes open.
Door Slides should be in Door Track at this time.
Rear Wall Angle Assembly
Side Wall Angle Assembly
23
Long Leg on Top.
Opening Faces In.
Short Leg on Bottom.
23AW