Table of Contents
Advertisement
4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
4-9-1. Switching the display item
1
Switching to setting item display
2
No. of stitches setting
Direction setting
Pitch setting
3
39
In sewing standby mode, press the
the
key to switch to design switch setting mode.
・ "Fxx****" (*) will be displayed.
Step No. (1 to 8)
Step No. (1 to 5)
* If the pitch setting which was displayed before the mode was
switched is "DS.1" to "DS.5", the display will switch to the setting
for step 1 (No. of stitches) for the stitch number which was selected
before the mode was switched. If the pitch setting before the mode
was switched was a normal sewing pitch, the "No. of stitches"
setting for "F11" (stitch 1, step 1) will be displayed.
If you press the
key, the setting item will change.
・ The display item changes in the order of "No. of stitches" -> "Feed
direction" -> "Pitch" -> "No. of stitches" each time the
is pressed.
When the +
key is pressed, the step number increases by 1. *1
When the -
key is pressed, the step number decreases by 1. *2
*1 If you press the +
key when the step number is "8", the design
stitch number will increase by 1 and the step number will change
to 1. (For design stitch number 5, it will become 1.)
*2 If you press the -
key when the step number is "1", the design
stitch number will decrease by 1 and the step number will change
to 8. (For design stitch number 1, it will become 5.)
S-7780A
key while holding down
1619D
key
1620D
1621D
Advertisement
Table of Contents
