Brother S-7780A Instruction Manual page 82

7. TROUBLESHOOTING
Version updating errors
Code
E882 No USB medial connected when power was turned
on.
Version update file could not be detected in USB
E883
media when power was turned on.
E884 Problem with version update file detected during
version updating.
Version update file could not be read from USB
E885
media during version updating.
E886 Problem with version update file detected during
version updating.
Version update file could not be written during
E887
version updating.
Incorrect data written to flash memory.
E889
E890 Error occurred during version update.
No USB media connected when there are no user
E891
programs which have been saved.
If an error code that is not listed above appears or if carrying out the specified remedy does not solve the problem,
contact the place of purchase.
73
Cause
S-7780A
Remedy
Turn off the power and check the connection of the
USB media.
Turn off the power and then check that the version
update file is contained in the USB media.
Turn off the power, and then repeat the version
update procedure.
Turn off the power and check the connection of the
USB media.
Turn off the power, and then repeat the version
update procedure.
Turn off the power, and then repeat the version
update procedure.
Turn off the power, and then repeat the version
update procedure.
Turn off the power, and then repeat the version
update procedure.
Turn off the power, and then repeat the version
update procedure.