Correction Sewing Function (2) - Brother S-7780A Instruction Manual

4-6-9. Correction sewing function (2)

When the correction sewing function (A04) is disabled, the hand switch functions other than correction sewing can be set.
For details on the functions which can be set, refer to "4-12. Hand switch" for the settings when the hand switch is set to other
than a correction sewing switch.
1
Selecting "A32 HSoF" (correction sewing
2
function)
Press either.
Displaying the setting value for a function other
3
than correction sewing
Setting a function other than correction sewing
4
(Function other
than correction
sewing is disabled)
5
Press the key.
4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
In sewing standby mode, press the
the
・ "A01 UPdn" will be displayed.
Press the -
・ When the
・ When the
・ When the
・ When the D
"oFF" to "1" through to "16".
・ When the C
"16" through to "1" to "oFF".
・ When the
NOTE:
(Function other
than correction
sewing is enabled)
Setting mode will be exited and normal operation will be possible.
S-7780A
key to switch to function setting mode.
or + keys to select "A32 HSoF".
+
key is pressed, the next setting is displayed.
-
key is pressed, the previous setting is displayed.
key is pressed, the setting value is displayed.
key is pressed, the setting value increases from
key is pressed, the setting value decreases from
key is pressed, the initial value will be reset.
If the key is pressed once more, the
will switch off and the display will return to the setting item.
key while holding down
1369D
1387D
indicator
1388D
32