Grizzly T32304 Owner's Manual page 30

4. Loosen blade guide support screw (see
Figure 37).
Figure 37. Location of blade guide support
screw.
5. Position blade guides approximately
behind gullet of blade teeth (see Figure 38),
and tighten screw.
Approximately ⁄ "
1
32
Blade
Gullets
Figure 38. Blade guides positioned just behind
blade gullets.
-28-
Blade Guide
Support
Screw
⁄ "
1
32
Blade
Guide
6. Remove table to gain access to lower blade
guides.
Note: Fence and meat pusher can remain
installed when removing table.
7.
Loosen lower blade guide adjustment screws
(see Figure 39), adjust blade guides to
approximately 0.004" (about the thickness of
a dollar bill) away from blade.
Figure 39. Adjustment screws securing lower
blade guides.
8. Position blade guides just behind gullet of
blade teeth (see Figure 38), and secure.
9. Re-install table removed in Step 5.
10. Re-install blade guard removed in Step 2.
Model T32304 (Mfd. Since 02/21)
Blade Guide
(1 of 2)