Grizzly T32304 Owner's Manual page 22

20. Install fence on fence shaft and secure with
(1) M6-1 x 16 cap screw (see Figure 23).
21. Install meat pusher on pusher shaft and
secure with (1) M6-1 x 16 cap screw (see
Figure 23).
Fence
Fence
Shaft
Figure 23. Fence and meat pusher installed on
shafts.
22. Loosen lock handle on meat grinder, and
line up fixed key on grinder with keyway on
grinder mount (see Figure 24).
Figure 24. Installing meat grinder.
-20-
x 2
Meat Pusher
Pusher
Shaft
Cap Screws
Keyway
23. Remove collar from end of meat grinder (see
Figure 25), fit collar over sausage stuffer,
and tighten on meat grinder.
Collar
Sausage Stuffer
Figure 25. Installing sausage stuffer on meat
grinder.
24. Slide meat grinder all the way on grinder
mount and tighten lock handle to secure meat
grinder in place (see Figure 26).
Note: If meat grinder does not fully seat, it
may be necessary to spin pulley wheel by
hand so meat grinder tongue fits into groove
on auger.
Figure 26. Meat grinder installed.
Model T32304 (Mfd. Since 02/21)
Lock Handle