Safety Precautions (English) - Nautilus Hyosung MX5600 Installation Manual

Hide thumbs Also See for MX5600:
Table of Contents

Advertisement

Installation Manual

Safety Precautions (English)

▶ Common Safety Precaution
▶ Description of Precaution Symbols
▶ Please read the following instructions before operating equipment.
▪ Operate equipment in the order outlined in this manual.
▪ Follow precautions indicated in this manual, as well as the equipment itself.
Failure to properly address these precautions may lead to injury or damage to the
product.
▪ Avoid operations not addressed in this manual.
▪ If you cannot remedy system problems using the methods outlined in this manual,
please refer to contact information listed in the manual.
▪ Any change or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority to
operate the equipment.
<Note!>
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
Symbol
© 2012 Nautilus Hyosung Inc. All Rights Reserved.
Precautions outlined this manual provide information on safe
and proper handling of the product. Non-compliance of the
precautions may result in injury or damage to the product.
This precaution symbol with sample term tells you safety
warnings during equipment handlings.
Electrical Shock Warning
▪ Do not remove cover. Only a maintenance engineer is
allowed to open the cover.
▪ Do not touch. You may receive electric shock.
▪ Make sure to turn off the power when servicing the
equipment.
High Temperature Warning
▪ Do not touch the equipment when it is running.
▪ The equipment can get extremely hot and may cause a
burn.
▪ Make sure to close the cover before running the
equipment.
Chapter1.Preface
Description
1-4

Advertisement

Table of Contents
loading

Table of Contents