Nautilus Hyosung MX8800 Operator's Manual
  1. Manuals
  2. Brands
  3. Nautilus Hyosung Manuals
  4. Cash Counter
  5. MX8800
  6. Operator's manual

Nautilus Hyosung MX8800 Operator's Manual

Hide thumbs Also See for MX8800:
Table of Contents

Advertisement

Quick Links

Operator Manual
MX8800 System
V01.00.01 (2013.11.4)
© 2012 Nautilus Hyosung Inc. All Rights Reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MX8800 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Nautilus Hyosung MX8800

Summary of Contents for Nautilus Hyosung MX8800

  • Page 1 Operator Manual MX8800 System V01.00.01 (2013.11.4) © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 2 Add the note about the handset in the section of Video Chapter2 Banking Device. © 2012 Nautilus Hyosung All Rights Reserved. The content of this specification is protected by copyright laws. 2014. 5. 21. 2nd Release © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 3: Table Of Contents

    Remove jam from the B2 Upper Transport Path of BM2 ························································· 4-13 Remove jam from the B2 Upper Transport Path of BM2 ························································· 4-14 Remove jam from B2 Reject Transport Section ···································································· 4-15 © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 4 How to load the receipt paper........................6-2 How to clear receipt jam from the Printer ....................6-6 Chapter7. Coin Dispenser ......................7-1 Replenishing the Coin Dispenser ......................7-1 Clearing a coin jam ..........................7-3 Index ............................Index-1 Memo ............................Memo-1 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 5: Chapter1. Preface

    This manual details how the customers replenish the notes, paper and coins and how they remove the jam at the MX8800. Audience ▶ Customers and staffs of Nautilus Hyosung who use and operate the MX8800 in each branches of bank. Support Information ▶...

  • Page 6: Conventions

    Body Module-Up (Upper Body of the Module) BUNDLE Bulk Note Separation Module Bill Recycling Machine Camera Unit CASSETTE Cash & Check Cassette CCIM Cash & Check In Module Contactless Card Reader Control Electronics Coin Hopper Coin Dispenser © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 7 RT/A6 Retract & A6 Cassette Switch Separator Control Module Sensor and Indications Unit Service Provider Slip Printer (Receipt Printer) Tape Escrow Text Terminal Unit (OPL or SPL) Utility Cassette Vacuum Fluorescent Display © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 8: Safety Precautions

    4. The equipment is to be secured to the building structure before operation 5. A security container shall be permitted to optionally be provided with a secondary lock, but improper use of the secondary lock feature will reduce the security level of the ATM. © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 9 ▪ If the above-mentioned abnormalities occur, immediately turn off the power, unplug the equipment and contact the service center. ▪ If you ignore these symptoms, the equipment may catch on fire or cause electric shock. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 10: Related Document

    ▪ Installation Manual ▪ Service Manual ▪ MoniPlusVDM Manual (Diagnostic) For the contact of maintenance staffs of Nautilus Hyosung, see the E-mail addresses and telephone numbers provided separately. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 11: Chapter2. Introduction

    Chapter2. Introduction Chapter2. Introduction About the MX8800 ▶ The MX8800 is a full service ATM. Customers deposit the cash/check, make the withdrawal and receive the transaction records through openings in the fascia with MX8800 ATM. The MX8800 is a versatile, easily maintained delivery system that can be modified to keep pace with the bank's changing needs.

  • Page 12: The Exterior Overview

    Chapter2. Introduction Operator Manual The Exterior Overview ▶ The following picture shows the front of MX8800 and key units. The fascia provides the interface between the customer and MX8800. The customer selects transactions and requests information at the fascia. Webcam...

  • Page 13: The Interior Overview

    Operator Manual Chapter2. Introduction The Interior Overview ▶ The MX8800 consists of the safe where banknotes are stored and the side body where the CE and the power supply are installed. The interior and key units are as follows. Teller...

  • Page 14: Basic Features

    Chapter2. Introduction Operator Manual Basic Features ▶ Important features of the MX8800 is highlighted in the following list: Main Controller Core2Duo E7400 (2.8GHz) Memory DDR Memory 4 GB Storage 500 GB Device DV -RW Operating System Windows 7 Expansion Slots...
  • Page 15 Reject 50 Mixed Notes and Checks Cassette Article 6 10 Mixed Notes and Checks Cassette Escrow 50 Mixed Notes and Checks /1 transaction Deposit 50 Mixed Notes and Checks Reject /1 transaction © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 16 None Option Coin Hopper Denomination 4 sorts Dispensing Capacity 1cent 658ea, 5cent 449ea, 10cent 847ea, 25cent 355ea Journal Electronic Journal Supported DOT-JPR, Option Safety & Security Safety UL 291 Level-1 (Rear Access) © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 17 Proximity Sensor Infrared Type Distance: 30.0 ~ 360.0mm (1.18 ~ 14.17inch) Safety Door Open Direction LEFT TO RIGHT SWING Normal Swing (Front View) Installation Method Anchor Battery System Battery Alarm Battery Option © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 18: Devices Of Mx8800

    Basic Specification of Customer Display ▪ 15 inch LCD ▪ XGA Resolution ▪ 250cd/m Brightness ▪ 15 inch Privacy Filter Supported Basic Specification of Keypad ▪ Polycarbonate Encryption PIN Pad (PCI Compliant) © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 19: Teller Display

    Operator Manual Chapter2. Introduction Teller display ▶ Basic Specification of Teller Display ▪ 15 inch TFT LCD, 250cd/m ▪ 15 inch Resistive Touch Screen ▪ Slide Drawer Type © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 20: Video Banking Device

    Chapter2. Introduction Operator Manual Video Banking Device ▶ Basic Specification of Device ▪ 24” LCD ▪ Webcam, Speaker, Handset supported <Note!> 1. The handset of MX8800 is for internal communication. Webcam Speaker Speaker Camera Display for Video Banking Handset 2-10...

  • Page 21: Card Reader

    The dip card reader cannot retract, capture, or retain cards. Basic Specification of Card Reader ▪ Dip Type Card Reader ▪ ISO 1, 2, 3 Read ▪ IC Card Supported © 2012 Nautilus Hyosung Inc. All Rights Reserved. 2-11...

  • Page 22: Ce (Control Electronics, Pc)

    ▪ Windows 7 ▪ 5 Serial Ports ▪ 22 USB Ports (M/B 8EA, Hub 14EA) ▪ On-Board Dual VGA (DVI, RGB) • PCI_Ex x1 Dual VGA (DVI, RGB) ▪ 10/100/1000Mbps On-Board 2-12 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 23: Power Supply

    ▶ The power supply unit converts AC power to DC power and provides the voltage to various modules within the system. The power supply unit allows the user to turn on/off the system, enter power-failure mode, and perform other sequences. © 2012 Nautilus Hyosung Inc. All Rights Reserved. 2-13...

  • Page 24: Cash & Check In Module (Ccim)

    ▪ Bundle Capacity: 50 Checks/1 transaction ▪ Deposit Direction: 4 way • Image scanning: Double side scanning • MICR: CMC-7, E13-B • Endorsement Print: Double side printing, Ink jet • Shutter Type: Automatic Shutter 2-14 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 25: Brm (Bill Recycling Machine)

    • Non-Reflux 16,400 bills installed max in the cassette (injection by human) • Reflux 2,850 per recycling cassette (when auto stack) • Non-Reflux 3,000 per recycling cassette (injection by human) *For 0.1mm (0.0039inch) thickness bill © 2012 Nautilus Hyosung Inc. All Rights Reserved. 2-15...

  • Page 26: Spr (Slip Printer/Receipt Printer)

    ▪ Setting roll paper semi-automatically ▪ Black Mark Paper Optionally Supported Basic Specification of Paper ▪ Thermal Roll Paper ▪ Paper Roll Capacity of 1,000 Transactions / Roll (Depending on Format) 2-16 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 27: Coin Dispenser

    ATM transactions to a precise amount. Basic Specification of Coin Dispenser ▪ 4 sorts of denomination supported ▪ Dispensing Capacity: ∙ 1cent: 658ea ∙ 5cent: 449ea ∙ 10cent: 847ea ∙ 25cent: 355ea © 2012 Nautilus Hyosung Inc. All Rights Reserved. 2-17...

  • Page 28: Bar Code Reader (Bcr)

    ▶ This bar code reader provides a built-in object detection sensor (IR) that instantly turns on the scanner when an object is presented within the scanner’s field of view. 2D Bar Code 2-18 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 29: Contactless Card Reader (Ccr)

    Basic Specification of Contactless Card Reader ▪ Audio Guidance by Beeper ▪ 13.56MHz ISO14443 Type A,B, NFC and MiFare ▪ Payment Applications: American Express-Express Pay Discover Zip, JCB J/speedy Mastercard PayPass Mstripe Visa payWave MSD © 2012 Nautilus Hyosung Inc. All Rights Reserved. 2-19...

  • Page 30: Seismic Sensor And Heat Detector

    Heat detector is thermistor based design to provide temperature sensing that quickly, accurately, and consistently identifies when fixed temperature are exceeded. And also it can detect rate-of-rise by comparing two thermistor responses. 2-20 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 31: Chapter3. For The Beginning Operator

    1. Insert the system key in the side body door as picture below. 2. Turn the key (Clockwise) and hold the key to open the lock. 3. Pull the key and swing the door to the right side © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 32: Side Body Closing

    Operator Manual Side Body Closing ▶ Close the side body as follows 1. Swing the door until the doors are fully closed. 2. Turn the Key (Counter Clockwise). 3. Remove the key © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 33: Security Enclosure Opening

    1. Open the main body door with key. 2. Unlock the security door, refer to the relevant instructions detailed under “Opening/ Closing The Security Enclosure (Security Door)” for the configuration of MX8800 3. Turn and pull the Handle. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 34: Security Enclosure Closing

    1. Swing the door until the doors are fully closed and turn the handle. 2. Turn the dial Key (Counter Clockwise). 3. Close the outer door with key. 3. Remove the key. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 35: Switching Power On/Off

    1. Open the side body door 2. Check that Main Switch is on the position of “-“. 3. Press the power switch at the left side (“ON”). 4. The system will be turn on automatically © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 36: Switching Power Off

    4. The operating system will shut down then power will turn off. WARNING: Do NOT operate Main Switch on power supply when you would like to turn off the power. It may cause damage to operate system or destabilize control electronics in ATM. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 37: Power Supply Status

    <System Off> procedure starts and only [AC IN] LED is turned on. ▪ In case power failure occurs during normal system operation, the system will enter <Power Failure Mode> and only [DC OUT] will be turned off. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 38: Entering Teller Service Mode

    1. Insert the key hole and turn it clockwise. 2. Pull back the SPL handle, lift the handle upward, and then rotate the handle. You can adjust the angle of the handle as you want. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 39: How To Fold And Store In Case Of Unused

    ▶ Pull down the SPL handle and rotate it. When the handle is positioned horizontally, push it into the body. Do not excessively press the handle when you pull down and rotate the handle. Otherwise, it may cause failure of the handle. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 40: Opening/Closing The Security Enclosure (Security Door)

    Chapter3. For the beginning operator Operator Manual Opening/Closing the Security Enclosure (Security Door) ▶ The MX8800 has locks for the Vault. Security Door with Cencon The Cencon lock is highly-secured, advanced-design lock. Even though the lock is electromechanical, they require no wiring or batteries for opening the lock because they are self-powered.
  • Page 41 5. Turn the handle to the left (CCW) and open the security door. 6. Turn the dial a minimum of one complete rotation to the left (CCW) to extent the bolt. © 2012 Nautilus Hyosung Inc. All Rights Reserved. 3-11...
  • Page 42 The best thing to do in analyzing the lock level is to write down the entire string and then pick out the portions of it that are significant to you, or if you are experiencing a problem with the lock, report the entire string to the Tech Support group. 3-12 © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 43 Select and enter the new combination. “CnF” (confirm new Factory combination) will be displayed 11. Cnf  Enter New Combination  POC Enter new combination again to confirm. POC (Pull Out Change key) will be © 2012 Nautilus Hyosung Inc. All Rights Reserved. 3-13...
  • Page 44 15. OPr  Retract Bolt Turn the Dial to the right (CW) to retract the bolt. 16. Close Door 17. Extend Bolt Turn the Dial to the left (CCW) to extend the bolt. 3-14 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 45: Chapter4. Cash & Check In Module (Ccim)

    In case of the transaction cancellation, cash and check in reject section is ejected to the customer in a lump by the command of higher rank. BC (Bill Checker) This section verifies the image data on both sides of cash for identification © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 46 Cash and check received are stored in the cassette by sheets. The cassettes can be mounted or demounted from the unit with the key. And also cassette’s door can be opened using the key. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 47: Basic Specification Of Cash & Check In Module

    20.0 mm (0.79inch) Retract (Max.50 with New Notes) RT/A6 Cassette 7.0 mm (0.28inch) (Max.10 with New Notes)  It is the reference value when the thickness of bill used is 0.1mm (0.0039inch). © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 48: Specification Of External Appearance

    Width: 274.0 ± 2 mm (10.79 ± 0.08inch) Dimensions Length: 169.0 ± 2 mm (6.65 ± 0.08inch) RT/A6 Height: 62.0 ± 2mm (2.44 ± 0.08inch) Cassette 1.0Kg (2.20 lb) Weight (except Cash & Check weight) © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 49: Cash & Check Conditions

    Operator Manual Chapter4. Cash & Check In Module (CCIM) Cash & Check Conditions ▶ Please refer to “Bill Conditions” in the chapter5. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 50: How To Remove Jam From Each Section

    BOTTOM Module includes CASH CASSETTE Module and CHECK CASSETTE Module. Zone Abbreviation Description ① BUNDLE Bulk Note Separation Module ② Separator Control Module ③ Bill Checker ④ Alignment Module ⑤ RECOG Recognition Module © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 51 B4 GUIDE B4 Guide of Body Module1 ⑫ ESCROW Escrow Module ⑬ RT/A6 Retract & A6 Cassette ⑭ CASSETTE1 Cash Cassette ⑮ CASSETTE2 Check Cassette ► Open Status of Unit Transport Path © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 52: Remove Jam From Bundle Module

    1. After opening the Bundle Module and SCM, remove a jammed note. If necessary, turn the green Knob 1 to move the note to easily remove the jammed note. Removing jam from Bundle Module. Removing jam from Bundle Module. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 53: Remove Jam From The First Transport Path

    3. After checking if the jammed bill is removed, completely close the First Transport Path pushing the lock lever in the yellow arrow direction as shown in the picture. Opening SCM to remove jam. Closing SCM after removing jam. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 54: Remove Jam From Bc

    3. After checking if the jammed Note is removed, completely close the BC section by pushing the lock lever in the yellow arrow direction as shown in the picture. Opening BC (Zone ③) to remove jam. Closing BC after removing jam. 4-10 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 55: Remove Jam From Alg

    Note as shown in the picture below. 3. After checking if the jammed Note is removed, completely close the ALG section. Opening Zone ④ to remove jam. Turning the green knob to remove jam. © 2012 Nautilus Hyosung Inc. All Rights Reserved. 4-11...

  • Page 56: Remove Jam From Recog Transport Section

    Note as shown in the picture below. 3. After checking if the jammed Note is removed, completely close the Recog Transport Section. Pushing the lock lever to open Zone ⑤. Opening or Closing Zone ⑤. 4-12 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 57: Remove Jam From The B2 Upper Transport Path Of Bm2

    3. After checking if the jammed Note is removed, completely close Zone ⑥ as shown in the picture. Pushing the lock lever to open Zone ⑥. Opening or Closing Zone ⑥. © 2012 Nautilus Hyosung Inc. All Rights Reserved. 4-13...
  • Page 58 3. After checking if the jammed Note is removed, completely close Zone ⑥ as shown in the picture. Pushing the lock lever to open Zone ⑥. Opening or Closing Zone ⑥. 4-14 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 59: Remove Jam From B2 Reject Transport Section

    Section as shown in the picture. 4. If it is necessary to remove the inside jam of ALG, open the ALG guide as shown in the picture. Pushing the lock lever. Opening Zone ⑦-1, ⑦-2. © 2012 Nautilus Hyosung Inc. All Rights Reserved. 4-15...

  • Page 60: Remove Jam From B3 Transport Section

    Note as shown in the picture below. 3. After checking if the jammed Note is removed, completely close Zone ⑧ as shown in the picture. Opening Zone ⑧ Closing Zone ⑧ 4-16 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 61: Remove Jam From Reject Section

    Note as shown in the picture below. 3. After checking if the jammed Note is removed, completely close the door. Removing jam from Reject Section. © 2012 Nautilus Hyosung Inc. All Rights Reserved. 4-17...

  • Page 62: Remove Jam From B3 Escrow Transport Section

    3. After checking if the jammed Note is removed, push the green button and completely close Zone ⑩ as shown in the picture. Opening Zone ⑩ Closing Zone ⑩ 4-18 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 63: Remove Jam From B4 Transport Section

    3. After checking if the jammed Note is removed, push the green button and completely close Zone ⑪ as shown in the picture. Opening Zone ⑪ Closing Zone ⑪ © 2012 Nautilus Hyosung Inc. All Rights Reserved. 4-19...

  • Page 64: Remove Jam From Escrow

    5. And then come out one note from the escrow module. And remove the note as shown in lower figure. If necessary, repeat it to end. Finally turn the Lock Lever8 to “CLOSED” position. Removing jam from Escrow Removing note from Escrow 4-20 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 65: Remove Jam From Rt/A6 Cassette

    4. After removing jam, close the door and turn the key to the left. And then it is locked. 5. To mount RT/A6 Cassette, turn the key to the left and remove it. Then mount the RT/A6 Cassette. (Auto-locking mounting) Moving BM3 Separating Retract BOX Removing jam from Retract © 2012 Nautilus Hyosung Inc. All Rights Reserved. 4-21...
  • Page 66 Chapter4. Cash & Check In Module (CCIM) Operator Manual Opening or closing the door of Retract BOX Removing jam from Retract Section 4-22 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 67: Remove Jam From Cassette

    3. After removing jam, close the door and turn the key to the left. And then it is locked. 4. To mount the Cassette, turn the key to the left and remove it. Then it is mounted automatically. Front View of Cassette Section. Separating the Cassette. © 2012 Nautilus Hyosung Inc. All Rights Reserved. 4-23...
  • Page 68 Turning the key to the right to open the door and turning the key to the left to close the door. Pressing the green lever to drop down the Push Plate. 4-24 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 69: How To Change Prt Maintenance Module

    ※ After replacing Ink Cartridge, you have to reset "PRT Cartridge Count". And you may need to replace Ink Head Cleaner Felt if necessary Installing Ink Cartridge © 2012 Nautilus Hyosung Inc. All Rights Reserved. 4-25...

  • Page 70: How To Reset Prt Cartridge Count

    3. Press the green button on PRT capping module installed BM3 for 3 seconds as shows the picture (Pressing the green button). 4. Push down DIP Switch 1 DIP Switch 1 Pressing the green button 4-26 © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 71 4.5 million, it will be displayed in red. And you have to replace the Ink Cartridge. < Note! > Ink Count Clear is Available since V01.00.54 of VDM and V02.00.35 of firmware. © 2012 Nautilus Hyosung Inc. All Rights Reserved. 4-27...

  • Page 72: How To Replace Ink Head Cleaner Felt

    3. After replacing the new one by removing the tape, assemble the felt unit in the reverse process Dissembling the Felt Unit Replacing Ink Head Cleaner Felt 4-28 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 73: Chapter5. Bill Recycling Machine (Brm)

    ▶ The idea of recycling is to make the cash that is paid in during deposit transactions available again for dispensing. This considerably lengthens the replenishment or emptying cycles on cash-in/cash-out systems and, at the same time, the cash holding per system can be reduced. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 74: Basic Specification Of Bill Recycling Machine

    Unclaimed Cassette 45.0mm During Stack 300bills (UTC1) (1.77inch) Reject Cassette 2 41.5mm During Stack 300bills (UTC2) (1.63inch)  It is the reference value when the thickness of bill used is 0.1 mm (0.0039inch). © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 75: Specification Of External Appearance

    Width: 217.0 ± 3.0 (mm) (8.54 ± 0.12inch) Length: 140.0 ± 3.0 (mm) Utility Dimensions (5.51 ± 0.12inch) Cassette Height: 117.0 ± 3.0 (mm) (UTC) (4.61 ± 0.12inch) Weight 1.3 Kg (2.87ib, except bill weight) © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 76: Bill Conditions

    2. Bill has sufficient life or sizing to be handled easily 3. Bill which can be manually held straightly when one end is held by a hand and the bill is slightly curved vertically. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 77: Unacceptable Condition

    Chapter5. Bill Recycling Machine (BRM) Unacceptable condition ▶ 1. Bill with serious wrinkles, torn or broken section wherein paper fiber is broken and separation begins. ▪ Wrinkle Wrinkle ▪ Torn Torn ▪ Broken section Broken Section © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 78 4. Bill ragged and cannot be held straightly when one end is supported by a hand 20.0mm (0.79inch) 35.0mm (1.38inch) When the bill is held by 20.0mm (0.79inch) and the straightness of the bill is 35.0mm (1.38inch) or less, it cannot be used © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 79 5. Bill with cellophane tape, scotch tape, etc Tape 6. Bill with folds Fold 7. Gradually curved bill (bills tied by hand seal, etc) Band seal 8. Bill with folded lines Case 1 Case 2 © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 80 Chapter5. Bill Recycling Machine (BRM) Operator Manual Case 3 <Note!> Bill distortion should not exceed 10.0 mm (0.39inch). © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 81: How To Open And Close The Lower Unit

    1. To release the lock from system, press the lever A as shown in pictured below. Then, pull the lower unit pressing lever A until the lower unit is completely taken out. 2. Lift up the Mid Transport Path pressing its handle B until it fixes. © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 82 2 steps, so you have to close it once again pressing the lever 2. Push the lower unit into the system until it locks into its position with a click as shown in pictured below. 5-10 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 83: How To Replenish The Cassette With Bills

    2. Separate the cassette from the set guide holding the handle C. 3. Unfold the holder of the cassette and lay it on the flat surface as shown in below picture. © 2012 Nautilus Hyosung Inc. All Rights Reserved. 5-11...
  • Page 84 5. Press the green lever D and pull the Push-Plate to the end in the arrow direction. <Note!> If pressing the lever using one finger, entire cassette can move. So please use both the thumb and forefinger. 5-12 © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 85 7. Replenish the cassette with the bill to the position of the label and push the Push- Plate to the end in the arrow direction pressing the green lever D. Label © 2012 Nautilus Hyosung Inc. All Rights Reserved. 5-13...
  • Page 86 Fan the notes so that the notes are not sticking together. b. Remove all notes with holes or notes that are torn. c. Unfold the folded notes. d. Place the notes correctly. 5-14 © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 87 8. Close the door with the key. After closing the door, remove the key from the cassette. 9. Fold the holder of the cassette and mount the cassette into the set guide. 10. Mount the lower unit into the system. © 2012 Nautilus Hyosung Inc. All Rights Reserved. 5-15...

  • Page 88: How To Remove The Bills From Reject Cassette

    2. Separate the Reject Cassette from the set guide holding the handle A. 3. Put the Reject Cassette on the flat surface and open the door by turning the key clockwise. 5-16 © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 89 Reject Cassette until the space is created enough to remove the bills. Then remove the bills from the Reject Cassette. 5. Close the door of the Reject Cassette with the key. After closing the door, remove the key from the reject cassette. © 2012 Nautilus Hyosung Inc. All Rights Reserved. 5-17...
  • Page 90 Chapter5. Bill Recycling Machine (BRM) Operator Manual 6. After closing the door, mount the Reject Cassette into the set guide. 7. Mount the lower unit into system. 5-18 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 91: How To Remove The Bills From Utility Cassette

    ▶ This section describes how to remove the bills from utility cassette. 1. Turn the key clockwise to separate the Utility Cassette. 2. Pull the Utility Cassette holding the handle A to completely separate the Utility Cassette. © 2012 Nautilus Hyosung Inc. All Rights Reserved. 5-19...
  • Page 92 Remove the key after closing the door. 5. Mount the Utility Cassette and turn the key counterclockwise. Then completely inset the Utility Cassette into BRM20 as shown in picture below. 5-20 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 93: How To Open And Close The Upper Unit

    1. Hold the handle B with one hand and pull the safety lock C in the arrow direction with another hand to release the lock. 2. Slowly push the Customer Service Module in the arrow direction to completely close © 2012 Nautilus Hyosung Inc. All Rights Reserved. 5-21...
  • Page 94 1. Hold the handle B with one hand and push the safety lock C in the arrow direction with another hand to release the lock. 2. Slowly push the Tape Escrow in the arrow direction to completely close it. 5-22 © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 95 ▶ Caution take your hands off the handle until the upper unit is completely closed because the safety lock is released! And also, do hold the other places except the handle! © 2012 Nautilus Hyosung Inc. All Rights Reserved. 5-23...

  • Page 96: How To Open And Close The Upper Body Of The Module

    2. Pull the upper unit in the arrow direction by pulling the lever A forward. ▶Close the upper body of BRM as follows 1. Push the upper unit into the system until it is locked. 5-24 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 97: How To Remove The Jam

    1. Turn the green knob A counterclockwise and open the door. 2. Move the Push-Plate in the arrow direction by turning the green knob B clockwise for the jammed bill to be shown. © 2012 Nautilus Hyosung Inc. All Rights Reserved. 5-25...
  • Page 98 Chapter5. Bill Recycling Machine (BRM) Operator Manual 3. Turn the knob C clockwise and completely remove the jammed bill. 4. After removing the jammed bill, turn the knob A clockwise and close the door. 5-26 © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 99 3. Turn the green knob C clockwise for the bill to be shown and remove the jammed bill with another hand. 4. After removing the jammed bill, close the upper unit. (Refer to “Upper Unit Closing” ) © 2012 Nautilus Hyosung Inc. All Rights Reserved. 5-27...
  • Page 100 The lift up BC (Bill Checker). 3. While still holding the lever, turn the green knob B clockwise and the jammed bill inside BC appears along the transport path. At this time, remove the jammed bill. 5-28 © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 101 Operator Manual Chapter5. Bill Recycling Machine (BRM) 4. After removing the jammed bill, completely close BC by pressing it. 5. Close Tape Escrow and Customer Service Module. © 2012 Nautilus Hyosung Inc. All Rights Reserved. 5-29...
  • Page 102 2. Turn the green knob A clockwise for the jammed bill to be shown and remove the jammed bill while holding the transport guide B. 3. After removing jam, close Customer Service Module and Tape Escrow. 5-30 © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 103 4. Do not remove a normal bill wound around the drum because it is returned during BRM initialization. 5. After removing jam, close Customer Service Module and Tape Escrow. © 2012 Nautilus Hyosung Inc. All Rights Reserved. 5-31...
  • Page 104 3. Turn the green knob A clockwise until the jammed bill occurred during entering into the cassette shows and then remove the jammed bill as shown in below picture. 4. Mount the lower unit into system. 5-32 © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 105 2. Pull the Push-Plate in the arrow direction of the below picture to remove the jammed bill. 3. Find the green knob A in the upper part of the internal of the cassette. © 2012 Nautilus Hyosung Inc. All Rights Reserved. 5-33...
  • Page 106 After removing the jammed bill, return the Push-Plate to the original position as shown in below picture. 5. Close the cassette door and mount the cassette into the set guide. 6. Mount the lower unit into system. 5-34 © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 107 3. After removing the jammed bills from Reject Cassette, close the door of Reject Cassette and mount Reject Cassette into the set guide. 4. Mount the lower unit into system. © 2012 Nautilus Hyosung Inc. All Rights Reserved. 5-35...
  • Page 108 2. Turn the green knob A counterclockwise and the jammed bill appears. At this time, put the hand into Utility Cassette and remove the jammed bills. 3. Close the door of Utility Cassette with key. Then remove the key from the cassette. 5-36 © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 109: Chapter6. Receipt Printer

    8. Make sure the paper is rolled evenly. 9. Miscellaneous: If the paper comes in contact with carbon copy paper or if the paper surface is scratched with a metallic object, de-coloring may occur. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 110: How To Load The Receipt Paper

    ▪ Load a paper roll into the unit with the shape of the roll kept intact. (Deformed roll may cause jamming.) Correct shape of the paper roll ▪ The leading edge of the roll shall neatly be cut prior to loading the roll. © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 111 2. Retract printer assembly from the rail assembly. This can be accomplished by pressing the green button and then pull out the printer towards you. 3. Insert the paper axis into the center of receipt roll and mount it onto the charger. © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 112 <Note!> 1. Be sure to remove the test sheet printed after feeding the paper and take the printer into the system. Then close the side door using key. © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 113 Operator Manual Chapter6. Receipt Printer 2. Refer to diagram stickers placed on either side of the center section of the thermal printer. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 114: How To Clear Receipt Jam From The Printer

    3. Open the print head assembly by pushing down green lever of print head assembly. 4. To take out a jammed paper in front of transport path, lift up the transparent window guide and remove the jamming receipt carefully. © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 115 Thermal Print Head (TPH) is closed. When finished loading paper, close the rear Panel and remove the key. <Note!> After all paper jams have been cleared, reload the paper and test the printer using Diagnostics. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 116: Chapter7. Coin Dispenser

    Be sure to check the denomination label on the coin hopper when replenishing coins. CAUTION: ▪ If cloth coin bags are used to transport or to load coins into the coin dispenser, it is © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 117 ▪ If coin dust accumulates in the hopper during use, it may cover the outlet sensor, and causes the malfunction. 3. Repeat the procedure for the other three coin hoppers in the coin dispenser. 4. Push the coin dispenser’s servicing tray back to its docked position. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 118: Clearing A Coin Jam

    3. Clear the jammed coin by either: ▪ Rotate the disk manually, first counter clock wise, and then clock wise to free the coin or ▪ Push the coin back in using another coin. © 2012 Nautilus Hyosung Inc. All Rights Reserved.
  • Page 119 Operator Manual 4. Remove any debris from the disk bed assembly. 5. Clean the exit window opto with a clean dry cloth. 6. Re-assemble, as described. 7. Refill and test the hopper. © 2012 Nautilus Hyosung Inc. All Rights Reserved.

  • Page 120: Index

    Operator Manual Index Index © 2012 Nautilus Hyosung Inc. All Rights Reserved. Index-1...

  • Page 121: Memo

    Operator Manual Memo Memo © 2012 Nautilus Hyosung Inc. All Rights Reserved. Memo-1...

Table of Contents

Save PDF