Related Manuals for Nautilus Hyosung MX7600I
Summary of Contents for Nautilus Hyosung MX7600I
- Page 1 Installation Manual MX7600I System V01.00.04 (2015.04.12) © 2012 Nautilus Hyosung Inc. All Rights Reserved.
- Page 2 Description of Change Chapter V1.0 2011/11 New Publication V1.1 2012/5 Added “Appendix 1. Module Setting (CCIM)” Appendix Modified “Maintenance Space for MX7600I ATM: Plan View (1)” Modified “Anchor” V01.00.02 2012/08/27 Added “Height and Depth Main Fascia Items” Chapter3 V01.00.03 2012/10/10 Added “Safety Precautions”...
-
Page 3: Table Of Contents
Removing the Protective Material from the main body of Cash & Check In Module ......A-4 Removing the locking section from the main body of Cash & Check In Module........A-5 Separating the Cassette Section ......................A-6 Installing Section............................A-7 Notes............................Notes-1 © 2012 Nautilus Hyosung, Inc. All Rights Reserved. -
Page 4: Chapter1. Preface
Purpose ► This manual provides guidelines for preparing and installing the MX7600I ATM. Audience ► This manual is written for bank branch personnel who are installing the MX7600I. Additional audiences include designers and construction workers involved in this installation. Support Information ►... -
Page 5: Conventions
Camera Unit CASSETTE Cash & Check Cassette CCIM Cash & Check In Module Contactless Card Reader Cash Dispenser Unit Control Electronics Earphone Jack Voice Converter for Visually Disabled Persons (ADA) Europay, Mastercard, Visa © 2012 Nautilus Hyosung Inc. All Rights Reserved. - Page 6 Recognition Module REJECT Reject Module RT/A6 Retract & A6 Cassette Switch Separator Control Module Sensor and Indications Unit Service Provider Slip Printer (Receipt Printer) Text Terminal Unit (OPL or SPL) Vacuum Fluorescent Display © 2012 Nautilus Hyosung Inc. All Rights Reserved.
-
Page 7: Safety Precautions (English)
▪ Do not touch the equipment when it is running. ▪ The equipment can get extremely hot and may cause a burn. ▪ Make sure to close the cover before running the equipment. © 2012 Nautilus Hyosung Inc. All Rights Reserved. - Page 8 TYPE. DISPOSED OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS 3. FOR PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AN SHALL BE EASILY ACCESSIBLE 4. THE EQUIPMENT IS TO BE SECURED TO THE BUILDING STRUCTURE BEFORE OPERATION © 2012 Nautilus Hyosung Inc. All Rights Reserved.
-
Page 9: Précautions Pour La Sécurité (French)
• Ne pas retirer le couvercle. Seul le technicien d'entretien est autorisé à ouvrir le couvercle. • Ne pas toucher. Vous pouvez avoir un choc électrique. • Assurez-vous d'éteindre l'appareil lors de l'entretien de l'équipement. © 2012 Nautilus Hyosung Inc. All Rights Reserved. - Page 10 2. RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACEE PAR UN TYPE INCORRECT. DISPOSER POUR UTILISATION DES BATTRIES SELON LES INSTRUCTIONS 3. POUR LES APPAREILS RACCORDES, LA PRISE DOIT ETRE INSTALLEE PRES D’EQUIPEMENT POUR ÊTRE FACILEMENT ACCESSIBLE © 2012 Nautilus Hyosung Inc. All Rights Reserved.
-
Page 11: Related Document
4. L’EQUIPEMENT DOIT ETRE SECURISE A LA STRUCTURE DU BATIMENT AVANT D'UTILISER Related Document ► Related documents are listed as follows. If needed, please contact the Nautilus Hyosung technical support team or maintenance team for copies. ▪ Operator Manual ▪ Maintenance Manual ►... -
Page 12: Chapter2. Introduction
Chapter2. Introduction Chapter 2. Introduction About the MX7600I ► The MX7600I is a full service ATM. Consumers can deposit mixed cash/check in one slot a nd receive dispensed cash and transaction records through openings in the fascia. The Monimax7600I ATM is installed on a new or existing concrete island. The terminal is weather-sealed to allow for exposure to the weather. -
Page 13: System Identification Label
Installation Manual Chapter2. Introduction System Identification Label ▶ The System Label below shows the layout of the product identification label which is fixed inside the side box of the ATM © 2012 Nautilus Hyosung, Inc. All Rights Reserved. -
Page 14: Chapter3. Installation Information
Chapter3. Installation Information Chapter 3. Installation Information Installation Condition and Space ► When you determine the location of your MX7600I ATM, ensure that the physical environment, including the temperature and humidity, meets the requirements. Following conditions should be met before installing equipment. -
Page 15: Packing Dimensions & Weight
In some cases it may be necessary to store the ATM (in its box) before it is installed. See figure below for information on the dimensions of a boxed Monimax7600I ATM. ► Weight of MX7600I: 1100kg (2,425.1lbs) © 2012 Nautilus Hyosung Inc. All Rights Reserved. -
Page 16: Atm Dimensions
Installation Manual Chapter3. Installation Information ATM Dimensions ► The figure below shows the dimensions of MX7600I ATM viewed from the front. © 2012 Nautilus Hyosung Inc. All Rights Reserved. - Page 17 Installation Manual Chapter3. Installation Information ► The figure below shows the dimensions of MX7600I ATM viewed from the side. © 2012 Nautilus Hyosung Inc. All Rights Reserved.
-
Page 18: Height And Depth Main Fascia Items
Top of the function key 40.18” [1020.5mm] 35.65” [905.4mm] Card Reader Cash Dispenser, Cash & Check 30.39” [771.8mm] Input Module 41.26” [1048.0mm] 46.00” [1168.3mm] 48.03” [1220.0mm] 3.37” [85.7mm] 55.71” [1415.0mm] 35.20” [894.0mm] © 2012 Nautilus Hyosung Inc. All Rights Reserved. -
Page 19: Fascia Item Locations For Voice Guidance
Installation Manual Chapter3. Installation Information Fascia Item Locations for Voice Guidance Unit CCIM Symbol Distance 127.6mm 254.5mm 406.1mm 72.2mm From (5.02in) (10.01in) (15.98in) (2.84in) No.5 Key Clock Face Position © 2012 Nautilus Hyosung Inc. All Rights Reserved. -
Page 20: Recommended Installation And Service Clearance
Recommended Installation and Service Clearance ► The Monimax7600I ATM can be placed on a new or existing concrete island ► The following diagrams describe the recommended areas required for installing and servicing the MX7600I. (Plan View) © 2012 Nautilus Hyosung Inc. All Rights Reserved. - Page 21 Installation Manual Chapter3. Installation Information ▶ The following diagram describes the recommended areas required for installing and servicing the MX7600I. (Side View) © 2012 Nautilus Hyosung Inc. All Rights Reserved.
- Page 22 Installation Manual Chapter3. Installation Information © 2012 Nautilus Hyosung Inc. All Rights Reserved.
-
Page 23: Ac Inlet Box
NOTE3 - Surge Protector: Prevent the system damage from inflow of high voltage such as thunderbolt. (AC Free Voltage can be inputted.) NOTE4 - Multi Outlet: Distribute AC Power to each system power. NOTE5 – AC Power Strip: Distribute AC Standard Power to sub-units. 3-10 © 2012 Nautilus Hyosung Inc. All Rights Reserved. - Page 24 2. This equipment must be grounded (earthed). 3. Allowable current of the system is 20A. So, if you use the power cable with small capacity, do not operate all three heaters. 3-11 © 2012 Nautilus Hyosung Inc. All Rights Reserved.
-
Page 25: Terminal Block Interface
Installation Manual Chapter3. Installation Information Terminal Block Interface ► Terminal Block Interface (1) 3-12 © 2012 Nautilus Hyosung Inc. All Rights Reserved. - Page 26 Installation Manual Chapter3. Installation Information ► Terminal Block Interface (2) 3-13 © 2012 Nautilus Hyosung Inc. All Rights Reserved.
-
Page 27: Chapter4. System Installation
4. Moving this ATM machine to the installation site. PRECAUTION: MX7600I ATM machine is very heavy equipment and can cause injuries if not handled with caution. Read the following carefully. ▪ Firmly close the vault door and lock the door by turning the knob completely. -
Page 28: Bolting Down The Mx7600I
► To bolt down the MX7600I using the Anchor Bolt Location Sheet (template), perform the following steps: 1. Ensure that the surface where the MX7600I is to be placed is level so that the unit will not tip over when opening the upper/lower modules or the door. -
Page 29: Appendix
2. Turn the key clockwise and open the lower front door. 3. Insert the key into the lock on the upper front hatch and turn the key clockwise Then open the upper front hatch pulling it upward. © 2012 Nautilus Hyosung Inc. All Rights Reserved. - Page 30 Nut Driver 6. Then remove topper cover and install the topper on the ATM. Insert the topper cable into the hole which is shown after removing topper cover to install the topper. © 2012 Nautilus Hyosung Inc. All Rights Reserved.
-
Page 31: Atm Signage
► Be supposed to paste the decoration label on the light, where the bank logo or advertisement is printed. Decorate Label where the bank logo or advertisement is printed. ► Dimension of ATM Signage © 2012 Nautilus Hyosung Inc. All Rights Reserved. -
Page 32: Cash & Check In Module (Ccim) In The Safety Body
1. Remove the tape from the Bundle Door. 2. Lift up the door and remove the Bubble Bag inside. ▶ Reject Section Remove a tape from the Reject Section. ▶ Bottom Section Remove the desiccant attached on the bottom. © 2012 Nautilus Hyosung Inc. All Rights Reserved. -
Page 33: Removing The Locking Section From The Main Body Of Cash & Check In Module
▶ Removing the Lock Lever Tie from the main body Remove the tie from the Lock Section marked in the picture below (9 points). Removing the Lock Lever Tie from the main body © 2012 Nautilus Hyosung Inc. All Rights Reserved. -
Page 34: Separating The Cassette Section
3. Open the door with the key. Then remove the tape on the bottom of the middle guide. <Procedure to remove the protective material from the RT/A6 Cassette Section> © 2012 Nautilus Hyosung Inc. All Rights Reserved. -
Page 35: Installing Section
► Installing the Cash & Check & RT/A6 Cassette Section Insert and push the Cash & Check & RT/A6 cassette in body module completely. Then it is locked automatically. ► Installing the PRT Cartridge Section © 2012 Nautilus Hyosung Inc. All Rights Reserved. - Page 36 1. Pulling the green knob until stopping (①), at the same time rotating right (②) and pulling it completely. 2. After opening the green grip (③), insert the ink cartridge in the cartridge adaptor (④). © 2012 Nautilus Hyosung Inc. All Rights Reserved.
- Page 37 (Before mounting it, see the ink cartridge installation guide on the packing bag) 4. Push the green knob completely to the left arrow direction (⑤) to sound the click of the latch, and then it is locked automatically. © 2012 Nautilus Hyosung Inc. All Rights Reserved.
-
Page 38: Notes
Installation Manual Notes Notes Notes-1 © 2012 Nautilus Hyosung Inc. All Rights Reserved.
Need help?
Do you have a question about the MX7600I and is the answer not in the manual?
Questions and answers