Download
Share
Print this page
Nautilus Hyosung MX5300CE Manual
  1. Manuals
  2. Brands
  3. Nautilus Hyosung Manuals
  4. Cash Counter
  5. MX5300CE
  6. Manual

Nautilus Hyosung MX5300CE Manual

Hide thumbs Also See for MX5300CE:

Advertisement

Quick Links

Download this manual
Operator Function
MX5300CE System
V01.00.06 (2013.5.31)
© Nautilus Hyosung, Inc. All Rights Reserved.

Advertisement

loading
Need help?

Need help?

Do you have a question about the MX5300CE and is the answer not in the manual?

Questions and answers

Related Manuals for Nautilus Hyosung MX5300CE

Summary of Contents for Nautilus Hyosung MX5300CE

  • Page 1 Operator Function MX5300CE System V01.00.06 (2013.5.31) © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 2 1. Changed the manual format V01.00.06 2013/05/31 1. Changed the image and field values Page-17, 18 © 2013 Nautilus Hyosung All Rights Reserved. The contents of this document could be changed as the document revises. 2013. 5. 31. 7th Release...

  • Page 3: Table Of Contents

    Transaction Setup ............................... 125 Fast Cash ............................... 126 Denomination ..............................127 Appendix A. SW Installation ........................Appendix-1 Clear NVRAM ...........................Appendix-1 Installation Guide ..........................Appendix-4 Appendix B. Transaction Screen Flow ....................Appendix-11 Transaction Process ........................Appendix-11 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 4 Appendix C. Supported USB Memory and HUB .................. Appendix-40 USB Memory ..........................Appendix-40 Supported USB HUB Types ......................Appendix-42 Advertisement & Receipt Header Image Update Guide ............... Appendix-43 Preparation ............................. Appendix-43 Execute updating ..........................Appendix-45 © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 5: Basic System Operation

    SERVICE 222222 (6 digits) MASTER 555555 (6 digits) Please make sure that default password should be changed to different password for your security as soon as this machine is installed at field site. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 6 O O O NEXT O O O PREV 10 O O O ERROR REPORT NEXT 10 O O O CODE MOVE FIRST O O O MOVE LAST O O O PRINT THIS O O O © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 7 CARD SCAN SENSOR DIAGNOSTIC SENSOR SENSOR FLICKER AUXILIARY UNIT FLICKER FLICKER FLICKER FLICKER FLICKER AGING WELCOM O O O MESSAGE CUSTOMER CHANGE RECEIPT O O O SETUP MESSAGE HEADER RECEIPT O O O TAIL © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 8 (DIAL UP) AFTER PIN AFTER ACCOUNT CERTIFICAT EN/DISABLE CHECK MESSAGE CASHING TYPE PIN OPTION EN/DISABLE RECEIPT PAPER LOW SENEOR OPTIONAL DEVICE FUNCTION2 OPTION CST SOUND FLICKER ON EN/DISABLE SURCHARGE SURCHARGE MODE OWNER AMOUNT © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 9 COUPO COUPO COUPO BASIC COUPON COUPO COUPO COUPO COUPON COUPON SETTING OPTION COUPO ADVERTISEME COUPO ENHANCE COUPO COUPON COUPO COUPO COUPO SCREEN1 EN/DIABLE SCREEN 1 PREVIEW DELETE SCREEN2 EN/DIABLE SCREEN 2 PREVIEW DELETE © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 10 STATUS MONITORIN EN/DISABLE COMMUNICA STANDARD3 TION OPTION HEADER COMMUNICA TION ID EN/DISABLE DIALUP COMMUNICA TION TCP/IP GENERAL OPTIONAL EOT/ENQ NO EOT OPTION REQUIRED SELECT NO ENQ PROCESSOR REQUIRED STANDARD STANDARD MESSAGE FORMAT STANDARD © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 11 DEFAULT O O O LANGUAGE ENGLISH O O O EN/DISABLE LANGUAGE EN/DISABLE SPANISH O O O EN/DISABLE FRENCH O O O EN/DISABLE OPERATOR O O O PASSWORD CHANGE SERVICE PASSWORD PASSWORD MASTER PASSWORD © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 12 DATE TO SEARCH O O O BACKUP O O O LOG TO USB 1800CE 5000CE 5300CE SYSTEM CONTROL CLEAR CLEAR SETTIN SELECT CLEAR CLEAR MACHINE JOURN NVRAM TYPE CLEAR TRANS SEQUE NUMBE CLEAR © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 13 ADDRESS NUMBER 1 (TCP/IP) HOST ADDRESS 2 PORT NUMBER 2 TERMINAL ID HEALTH EN/DISABLE CHECK SEND MESSAGE INTERVAL EN/DISABLE RMS RING COUNT (DIAL UP) REMOTE EN/DISABLE MONITOR LISTENING PORT TCP/IP) RMS Status EN/DISABLE © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 14 O O O MINUTE O O O DISPENSE LIMIT LB 0 LB 1 LB 2 FAST CASH RB 0 RB 1 RB 2 TRANSACTIO N SETUP CURRENCY CHECK EN/DISABLE CASSETTE DENOMINATIO CASSETTE CASSETTE © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 15 Operator Function Working Management Function Authority Main Sub1 Sub2 Sub3 Sub4 Sub5 CASSETTE © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 16: When An Error Occurs

    If the machine goes out of service, he error code will not always appear on the screen. If you do not see an error code, enter operator function and go to reports. Look in the error summary for error codes. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 17: How To Use Keypad

    ► This section explains the basic operation of the KeyPad. [Default KeyPad Character Table Screen] Shift Status NUMBER < ‘ > “ Space UPPER ALPHA Space LOWER The character on the current cursor position on TABLE the screen wil be selected © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 18: How To Enter The Character

    J. F6 key and CANCEL key in pinpad are used to exit. (If you didn’t press F5 key after changing, the changes will be ignored.) K. F7 key is used to move the cursor position UP. L. F8 key is used to move the cursor position DOWN. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 19: Supervisor Menu

    18) The Status of Receipt Printer(SPR) 19) Current Date and Time B. Functions F1) SETTLEMENT F2) CUSTOMER SETUP F3) JOURNAL F4) SYSTEM SETUP F5) REPORT F6) HOST SETUP F7) DIAGNOSTICS F8) TRANSACTION SETUP © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 20 Mexico, COUNTRY CODE Australia, New Zealand PROGRAM VERSION V01.04.02 Example TCP/IP LINE TYPE Configurable DIAL-UP STANDARD1 STANDARD2 MESSAGE FORMAT STANDARD3 TERMINAL ID NHATM001 ERROR CODE [00000(00)] STATUS MISSING NORMAL CST1(Media Status) EMPTY FULL © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 21 NORMAL CST4(Media Status) EMPTY FULL BILLS COUNT - 2000($20) CST1(Remaining Notes) BILLS COUNT - 100($20) CST2(Remaining Notes) BILLS COUNT - 2000($20) CST3(Remaining Notes) BILLS COUNT - 2000($20) CST4(Remaining Notes) REJECT COUNT(CDU) – REJECT © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 22: Settlement

    3) TRIAL DAY TOTAL : Just do settlement with host. (Not clear transaction info.) 4) CASSETTE TOTAL : Show note count and then clear note count. 5) TRIAL CASSETTE TOTAL : Just show note count. (Not clear note count.) © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 23: Add Cash

    ENTER key in the pinpad. If you completed the all cassettes, you have to press APPLY button to effect the value changes. <Note!> The total note count you enter must not exceed the maximum note count. (Max. note count: 2,000/CST) © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 24: Journal

    If you want to stop printing, you may stop it by pressing CANCEL key. 4) VIEW JOURNAL: Go to the next screen 5) PRINT LAST X: Go to the next screen © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 25: View Journal

    MOVE LAST button, you can see first or last journal. Besides, you can check up journal data you would try to search by using SEARCH JOURNAL button and just print out the current journal by pressing PRINT THIS button. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 26 SW Installation Search Journal ► You can search a specific journal with a journal index and see it if the index is valid. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 27: Print Last X

    JOURNAL main screen and then press ENTER key. Then the data you request is printed. If you want to stop printing, you may stop by pressing CANCEL key. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 28: Report

    VERSION, PRINT ALL SETUP and REJECT ANALYSIS. You can print out all information regarding each device as well as system value set up. If you want to go back the previous screen, press the CANCEL key. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 29: Error Code

    PRINT THIS button is for printing information about the error code displaying in the screen. SEARCH ERROR CODE button is to search for a specific error code immediately. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 30 ► You can search a specific error code if that exists. In order to use the function, please input the specific error code in the field and select OK button. If there is no result in database, “INVALID ERROR CODE” displays. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 31: Sw Version

    Operator Function SW Version ►This menu shows each software version. Each version will be displayed. (APPLICATION, CDU EP, CDU SP, SPR EP, SPR SP, MCU EP, MCU SP and etc.) © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 32: Print All Setup List

    CURRENCY ID TRANSACTION SETUP DENOMINATION FAST CASH LOW CURRENCY CHECK TERMINAL ID STANDARD 3 OPTION ROUTING ID HOST PHONE NUMBER HOST SETUP HEALTH CHECK OPTION AUTO DAY TOTAL OPTION RMS OPTION MASTER KEY INFO © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 33 CURRENCY ID TRANSACTION SETUP DENOMINATION FAST CASH LOW CURRENCY CHECK TERMINAL ID STANDARD 3 OPTION ROUTING ID HOST ADDRESS INFO HOST SETUP HEALTH CHECK OPTION AUTO DAY TOTAL OPTION RMS OPTION MASTER KEY INFO © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 34: Error Summary

    CLEAR button erases the history stacked in an ATM machine and set START DATE to the present date as well. (START DATE displays “01/01/2000 00:00:00” in ATM machines which have never done the CLEAR function.) © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 35: Reject Analysis

    PRINT button prints the reject analysis information. CLEAR button erases the reject analysis information and set START DATE to the present date as well. (START DATE displays “01/01/2000 00:00:00” in ATM machines which have never done the CLEAR function.) © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 36: Diagnostics

    ENTER key. To delete the test count while inputting, press CLEAR key. To cancel the test while testing, press CANCEL key. BLANK Key <Note!> TEST COUNT affects when testing RECEIPT PRINTER, CASH DISPENSER, and MODEM. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 37 4) If you cancel a test and then perform another test, the test count will be initialized. e.g. If you cancel a test when the tested count is 3, and then perform another test, the tested count starts at 0. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 38: Initialize

    1) Select DIAGNOSTICS in the OPERATOR FUNCTION. 2) Select the CASH DISPENSER in the DIAGNOSTICS menu. The CASH DISPENSER test will be performed. 3) When the ATM is normal state, the SUCCESS message will be displayed. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 39: Modem

    PHONE NUMBER, and then press ENTER Key for TEST DIAL. This function is used to check the function of the modem dial. Accessing the MODEM 1) Select DIAGNOSTICS in the OPERATOR FUNCTION. 2) Select the MODEM in the DIAGNOSTICS menu. 3) The MODEM TEST will be displayed. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 40 CONNECT for line test. This function is used to check the function of the TCP/IP. Accessing the TCP/IP 1) Select DIAGNOSTICS in the OPERATOR FUNCTION. 2) Select the TCP/IP in the DIAGNOSTICS menu. 3) The TCP/IP menu will be displayed. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 41 1. Select DIAGNOSTICS in the OPERATOR FUNCTION. 2. Select CARD SCAN in the DIAGNOSTICS menu. And if the display is ready, please insert and remove the card quickly. 3. The card data will be displayed. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 42 ► This AUXILIARY UNIT contains SENSOR and FLICKER. Please press each button on this menu to go to the next screen. To go back to the previous screen, press the CANCEL key in pinpad. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 43 GREEN COLOR. And if any sensor detects an object or is abnormal, the sensor will be displayed as RED COLOR. Moreover, if any sensor doesn’t exist, the sensor will not be displayed. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 44 GREEN COLOR. And if any sensor detects an object or is abnormal, the sensor will be displayed as RED COLOR. Moreover, if any sensor doesn’t exist, the sensor will not be displayed. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 45 1) Select DIAGNOSTICS in the OPERATOR FUNCTION. 2) Select AUXILIARY UNIT in the DIAGNOSTICS menu and then select FLICKER in the AUXILIARY menu. 3) Select any button to test EPP, CDU, SPR, MCU in each or ALL FLICKER. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 46 Accessing the AGING 1) Select DIAGNOSTICS in the OPERATOR FUNCTION. 2) Select AGING in the DIAGNOSTICS menu. 3) All units will be tested unlimitedly. When you press CANCEL key, the testing will be stopped. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 47: Customer Setup

    STANDARD3 OPTION and SELECT PROCESSOR. Please press each button on this menu to go to the next screen. To go back to the previous screen, press the CANCEL key in pinpad. <Note!> STANDARD3 OPTION is displayed only if the message format is STANDARD3 © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 48: Change Message

    RECEIPT ADDRESS & PHONE NUMBER display. You can set the information about ADDRESS and PHONE NUMBER in the RECEIPT. At last, the display can go back to the previous menu by pushing the CANCEL key in pinpad. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 49 ► Location of Messages on Receipt Refer to figure of the Sample Receipt below for the location of the messages. The default receipt format will not include any messages. Spanish transactions will be printed in English. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 50 SW Installation Welcome Message ► The WELCOME MESSAGE function is used to edit the welcome text. Please input the welcome message in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 51 ► The RECEIPT HEADER function is used to edit the message at the header of receipt. Please input the receipt header in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 52 ► The RECEIPT TAIL function is used to edit the message at the tail of receipt. Please input the receipt tail in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 53 ► The RECEIPT ADDRESS & PHONE NUMBER function is used to edit the message at the address & phone number of receipt. Please input the receipt address & phone number in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 54: Bin (Bank Identification Number) List

    You can input and edit it by using such as ADD, DELETE, EDIT, DELETE ALL button. Please press EXTENDED BIN LIST button on this menu to see the Extended Bin List. To go back to the previous screen, press the CANCEL key in pinpad. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 55 3,000 BIN LIST exclusive of the basic 20 BIN LIST. Use PREV or NEXT button to show BIN LIST before or after. You can change EXTENDED BIN LIST via FILE UPDATE using RMS or USB. To go back to the previous screen, press the CANCEL key in pinpad. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 56: Optional Function1

    To go back to the previous screen, press the CANCEL Key in pinpad <Note!> 1) CHECK CASHING is displayed only if the message format is STANDARD1 2) PRE DIALING is displayed only if Network is Dial up © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 57 Operator Function MOD 10 Check ► MOD 10 CHECK is to check the card data’s validation. Please press EN/DISABLE button to set up MOD 10 CHECK. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 58 Please press EN/DISABLE button to set up BALANCE AT START and CONTINUE EN/DISABLE button to set up whether it’ll CONTINUE the TRANSACTION after BALANCE AT START. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 59 ► This function is one of the options of the Value Added Service which exchanges checks for cash. To use the function, you should call technical support. The certification screen will appear if you didn’t certified. ►CERTIFICATION ►After CERTIFICATION © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 60 ► ACCOUNTS is to set up the accounts which is used on transaction. You can see CHECKING ACCOUNT, SAVINGS ACCOUNT and CREDIT CARD ACCOUNT however, only CREDIT CARD ACCOUNT can be set up. Please press CREDIT CARD EN/DISABLE button to set up CREDIT CARD ACCOUNT. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 61 Please press EN/DISABLE button to set up SELECT RECEIPT. If SELECT RECEIPT is DISABLED, the ATM MACHINE will print out the receipt unconditionally. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 62 Please press EN/DISABLE button to set up PRE DIALING and one of three buttons (AFTER CARD, ATER PIN and AFTER ACCOUNT) to determine the time when the ATM MACHINE makes a connection. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 63: Optional Function2

    Operator Function Optional Function2 ► OPTIONAL FUNCTION2 menu contains DEVICE OPTION. To go back to the previous screen, press the CANCEL Key in pinpad © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 64 ► DEVICE OPTION menu contains RECEIPT PAPER LOW SENSOR EN/DISABLE, CST SOUND ON/OFF, EPP FLICKER ON OPTION. Please press each button on this menu to set up items. To go back to the previous screen, press the CANCEL Key in pinpad © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 65: Surcharge Mode

    SURCHARGE PERCENT will be displayed in the surcharge warning screen during transaction. The factory default is surcharge enabled, surcharge amount is $1.50 and the surcharge owner is none. SURCHARGE PERCENT is to set up the percentage of surcharge. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 66 SW Installation Surcharge Owner ► The SURCHARGE OWNER function is used to edit the surcharge owner. Please input the surcharge owner in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 67 SURCHARGE AMOUNT. (GREATER: Maximum value, LESSER: Minimum value.) 4) LOCATION - Set surcharge warning screen option - BEGINNING: Shows Surcharge warning screen before customer selected amount. - AFTER AMOUNT: Shows Surcharge warning screen after customer selected amount. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 68: Advertisement

    5 and 30 in welcome screen. Please press each button on this menu to go to next screen. The advertisement image can be updated by SW Update with JPG format images. For more information, please refer to “Advertisement Update Guide” document. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 69 Operator Function Screen n. ► Please press SCREEN n EN/DISABLE button to set up SCREEN n, PREVIEW button to preview SCREEN n and DELETE button to delete the SCREEN n. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 70 COUPON setting screen will be displayed. BASIC COUPON supports 2line 39column, ENHANCED COUPON supports 16line 39column. If you set the ENHANCED COUPON and select COUPON SETTING button, ENHANCED COUPON setting screen will be displayed. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 71 Operator Function Basic Coupon Setting ► Please press each button on this menu to go to next screen © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 72 SW Installation Basic Coupon n. ► Please press BASIC COUPON n EN/DISABLE button to set up BASIC COUPON n, Please press COUPON n TEXT button on this menu to go to next screen. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 73 Coupon n. Text ► The COUPON n TEXT function is used to edit the coupon n text. Please input the welcome message in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 74 SW Installation Enhanced Coupon Setting ► Please press CUT OPTION button to set up AFTER RECEIPT or NOT USE, Please press each button on this menu to go to next screen. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 75 USE TIME. START TIME and END TIME is only used USE TIME option and the range is 00 ~ 23 Please press COUPON n TEXT button on this menu to go to next screen © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 76 ► The ENHANCED COUPON n TEXT function is used to edit the coupon n text. Please input the welcome message in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 77: Standard 3 Option

    The COMMUNICATION ID has to be set if using the COMMUNICATION HEADER function. 4) CRC (Cyclic Redundancy Checking) OPTION function is to set up whether CRC is used or not during communication with host. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 78 SW Installation Communication ID ► The COMMUNICATION ID function is used to edit the communication id. Please input the communication id in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 79: Select Processor

    OPTION, TCP/IP TYPE and REVERSAL RETRY COUNT <Note!> 1) EOT / ENQ OPTION is displayed only if the Network is Dial up or TCP/IP Type is VISA FRAMED 2) TCP/IP TYPE is displayed only if Network is TCP/IP © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 80 TCP/IP, communicate with host using LAN. <Note!> In case of selecting “IN SERVICE” on OP MAIN, if the value is different from the original value when entering in OP mode, exit OP and execute reboot. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 81 Operator Function EOT/ENQ Option ► EOT/ENQ OPTION contains GENERAL, EOT OPTIONAL, NO EOT REQUIRED and NO ENQ REQUIRED functions. You can select one of these options © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 82 CUSTOMER SETUP Screen. STANDARD 1 is a HYOSUNG message type and STANDARD 2 is a CSP200 message type, STANDARD 3 is Triton 9600 message type and EPS is an extended CSP200 message type. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 83 ‘ENABLE’ or ‘DISABLE’ about SSL EN/DISABLE and whether V23 or V3 regarding SSL VERSION as well. There are three kind of TCP/IP type in this TCP/IP COMMUNICATION menu (STANDARD TCP/IP, VISA FRAMED TCP/IP, and ACK CONTROLLED TCP/IP). © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 84 You can enter the count and then press ENTER (or CONFIRM) if you want to change try count of reversal transaction. (You should ask your DP about count of reversal transaction before change try count.) © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 85: System Setup

    Please press each button on this menu to go to next screen. To go back to the previous screen, press the CANCEL key in pinpad. <Note!> 1) TERMINAL IP is displayed only if the Network is TCP/IP. 2) MODEM PARAMETERS is displayed only if Network is Dial up. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 86: Date & Time

    DAY button. If you press each menu, the cursor will be positioned and you can change the value. This value is saved by pressing APPLY key, on the other hand, to go back to the previous screen, press the CANCEL key in pinpad. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 87: Speaker Volume

    Operator Function Speaker Volume ► The SPEAKER VOLUME function is used to set speaker volume by using DOWN and UP buttons. Once the button is pressed, ATM beeps. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 88: Terminal Ip

    If DHCP value is ENABLE, ATM uses DYNAMIC IP to connect to host. Otherwise, ATM uses STATIC IP. If you change DHCP value from ENABLE to DISABLE, you should set up STATIC IP again use IP ADDRESS, SUBNET MASK, GATEWAY and DNS buttons. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 89 ► The IP ADDRESS function is used to edit the ip address. Please input the ip address in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. It is able to input up to 15 units such as XXX.XXX.XXX.XXX © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 90 ► The SUBNET MASK function is used to edit the subnet mask. Please input the subnet mask in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. It is able to input up to 15 units such as XXX.XXX.XXX.XXX © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 91 ► The GATEWAY function is used to edit the gateway. Please input the gateway in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. It is able to input up to 15 units such as XXX.XXX.XXX.XXX © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 92 ► The DNS function is used to edit the dns. Please input the dns in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. It is able to input up to 15 units such as XXX.XXX.XXX.XXX © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 93: Language En/Disable

    ENGLISH, SPANISH, FRENCH. You can change default language pressing DEFAULT LANGUAGE SELECT button. If you press each EN/DISABLE button, one of ENABLE/DISABLE will be changed. <Note!> The Language which is selected as DEFAULT LANGUAGE cannot be changed. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 94: Change Password

    SW Installation Change Password ► You can change PASSWORD. Depending on authority, there are three passwords OPERATOR PASSWORD, SERVICE PASSWORD and MASTER PASSWORD. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 95 ► This menu enables you to change current operator password as new one. To change the current password, you should input the proper one in current password field or the password you have inputted when log in. The factory default value of operator password is "111111". © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 96 ► This menu enables you to change current service password as new one. To change the current password, you should input the proper one in current password field or the password you have inputted when log in. The factory default value of service password is "222222". © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 97 ► This menu enables you to change current master password as new one. To change the current password, you should input the proper one in current password field or the password you have inputted when log in. The factory default value of master password is "555555". © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 98: Modem Parameters

    Before editing the initial string, consult with service personnel. 2) MODEM TEST The MODEM TEST function is used to perform the modem reset test. When the error is occurred, contact the service personnel. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 99 ► The HOST INITIAL STRING function is used to edit the host initial string. Please input the host initial string in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 100 ► The RMS INITIAL STRING function is used to edit the rms initial string. Please input the rms initial string in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 101 ► This DEVICE SETUP menu contains CDU SETUP. Please press the CDU SETUP button on this menu to go to next screen. <Note!> When you change Device Setup Information, contact the service personnel. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 102 TURKEY ROMANIA AUSTRALIA INDIA TAIWAN EURO VIETNAM UKRAINA ISRAEL OTHER 2) CDU TYPE 0x00 0x01 0x03 0x0b 0x41 0x43 0x47 0x80 0x81 3) CASSETTE VOLUME 1 CASSETTE 2 CASSETTE 3 CASSETTE 4 CASSETTE © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 103: System Control

    SOFTWARE UPDATE. This is because Software Update functionality is supported at SYSTEM CONTROL menu. When SYSTEM CONTROL is submitted the files in USB flash drive will be copied to the ATM. <Note!> How to update the software, please refer to the Appendix © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 104 SW Installation Reboot ► If you press the YES button, the ATM will restart. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 105 ► Input the START DATE and END DATE using FROM and TO buttons. And press the SEARCH button. Then, the journal date between START DATE and END DATE will be sent to USB drive. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 106 SW Installation Clear NVRAM ► To clear NVRAM on the MX5000CE / MX5300CE / NH1800CE, begin by entering the Operator Function Menu using the Master Password. Then enter SYSTEM SETUP, SYSTEM CONTROL and CLEAR NVRAM in sequence. ►SET THE MACHINE TYPE Select the machine type (1800CE / 5000CE / 5300CE) for Clearing NVRAM.
  • Page 107 Terminal ID numbers and want to keep new records. 5) CLEAR LOG This will delete all logs permanently <Note!> Be careful when using these features (NVRAM clearing) – The initialized data can NOT be recovered. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 108: Host Setup

    Pressing function key beside menu button goes to next screen. To go back to the previous screen, press the CANCEL key in pinpad. [DIALUP] [TCP/IP] <Note!> ROUTING ID is displayed only if the message format is STANDARD1, 2 and © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 109: Key Management

    (Default PASSWORD 1 is ‘000000’. And default PASSWPRD 2 is ‘000000’ as well) If you enter PASSWORD 1 and PASSWORD 2 correctly, the main screen of KEY MANAGEMENT will be displayed as below. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 110 1) Select the HOST SETUP in the OPERATOR FUNCTION menu. 2) Select the KEY MANAGEMENT in the HOST SETUP menu. 3) Select the KEY INDEX in the KEY MANAGEMENT menu. Input the KEY INDEX and press ENTER key. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 111 1) Select the HOST SETUP in the OPERATOR FUNCTION menu. 2) Select the KEY MANAGEMENT in the HOST SETUP menu. 3) Select the CHECK KEY in the KEY MANAGEMENT menu. 4) It will display the check sum of all injected master key. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 112 ► The EDIT KEY function is used to enter the Master Key, Unique Key and Mac Key. .The authorized people by bank or DP will enter the Key(s) with this menu. KEY MODE: [DES], [TDES], [DUAL MASTER KEY] KEY MODE: [MAC], [TDES, MAC], [TDES, TMAC] © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 113 2) Enter the MASTER KEY INDEX. 3) Enter the MASTER KEY PART A. 4) Verify the MASTER KEY PART A. 5) After inputting the MASTER KEY PART A, the CHECK SUM will be displayed. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 114 10) After inputting the MAC KEY PART B, the CHECK SUM will be displayed. Press ENTER after confirming the check sum. <Note!> You have to input the SAME KEY INDEX for MAC KEY PART A and MAC KEY PART B. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 115 1) Select the HOST SETUP in the OPERATOR FUNCTION menu. 2) Select the KEY MANAGEMENT in the HOST SETUP menu. 3) Select the SERIAL NUMBER in the KEY MANAGEMENT menu. And insert serial number. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 116: Telephone Number (Only Dial-Up)

    This function is used to enter the primary phone number and the back-up phone number of the host. When dialing to host is failure (busy, no answer or etc), ATM switches to other phone number automatically. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 117: Host Address

    These values can be saved by pressing ENTER key HOST ADDRESS 1 and HOST ADDRESS 2 buttons go to the next page. To go back to the previous screen, press the CANCEL key in pinpad. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 118 ► The HOST ADDRESS 1 function is used to edit the host address 1. Please input the host address 1 in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 119 ► The HOST ADDRESS 2 function is used to edit the host address 2. Please input the host address 2 in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 120: Terminal Id

    Please input the terminal id in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. Host will identify ATM by looking at terminal ID. Terminal ID will be included in host message and will be printed on the receipt. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 121: Health Check Message

    HOST SEND is set up to “Enable”. The interval is dependent on “SEND INTERVAL”. If you press SEND INTERVAL button, the value of SEND INTERVAL can be adjusted (1 ~ 24). This value is saved by pressing ENTER button. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 122: Remote Monitor

    2) RMS STATUS SEND EN/DISABLE function is used to send the status message to RMS in enable or in disable. 3) The RMS PASSWORD function is used to set the RMS password to connect to ATM from RMS. © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 123 Display which is to set the RMS RING COUNT for the reception on standby of the ATM. [TCP/IP] Display which is to set the RMS LISTENING PORT for the reception on standby of the ATM. Default port is 5555 [DIALUP] [TCP/IP] © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 124 - Set the value using INTERVAL button. (Input the number from 1 to 24.) 3) PHONE 1, PHONE 2 - Display RMS TELEPHONE NUMBER for RMS COMMUNICATION - Set the values using PHONE NUMBER 1 and PHONE NUMBER 2. (Input the number up to 20.) © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 125 - Set the value using RMS ADDRESS button. If you press this button, It goes to next screen. 5) RMS LISTENNING PORT - Display “RMS LISTENING PORT”. - Set the value using RMS LISTENING PORT button. (Input the number from 0 to 65535) - Default port is 9999 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 126 SW Installation ►RMS ADDRESS The RMS ADDRESS function is used to edit the rms address. Please input the rms address in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 127: Routing Id

    Bank ID. This field is contained to STANDARD 1, STANDARD 2 and EPS format. Please input the routing id in the field and select OK button. If it succeeded, “OPERATION SUCCESSFUL!” displays. To go back to the previous screen, press the CANCEL key in pinpad. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 128: Auto Day Total

    TRIAL DAY TOTAL: ATM sends total to your processor - Set the value using TOTAL TYPE button. 3) HOUR / MINUTE - Display the time for the ATM to total itself - Set the value using HOUR and MINUTE button. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 129: Transaction Setup

    This function is used to set the detection of cassette low level (100 bills or less). If enabled, hardware will report the low condition to the software and the machine will go to “OUT OF SERVICE” mode under low note condition. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 130: Fast Cash

    FAST CASH screen. The maximum amount must be less than the DISPENSE LIMIT. You can set 6 kinds of values which are frequently requested by customer using this function. By using this function, customers withdraw the money more easily. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 131: Denomination

    Input the note value you want and press the ENTER key in the pinpad. If you completed the all cassette setting, you have to press APPLY button to effect the value changes. © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 132: Appendix A. Sw Installation

    S/W installation. If you upgrade ATM machine operating in the field, you must backup journal and remember configuration information before clearing NVRAM. (2) Clear NVRAM 1) Enter Supervisor Menu as Master Password © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 1...
  • Page 133 SW Installation 2) Select “SYSTEM SETUP” menu 3) Select “SYSTEM CONTROL” menu Appendix-2 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 134 SW Installation 4) Select “CLEAR NVRAM” menu 5) Select “CLEAR ALL” menu. 6) Confirm and select “Yes” menu. 7) All NVRAM data will be cleared and ATM will be automatically rebooted. © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 3...

  • Page 135: Installation Guide

    SW Installation Installation Guide ► DIAL-UP INITIAL SETTING (1) DIAL-UP SETTING 1) Input Master password to enter main screen. 2) Select “HOST SETUP” menu. Appendix-4 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 136 ‘ENTER’ on the pinpad. 5) After above procedures, press ‘CANCEL’ key on the the pinpad in the main screen ► TCP/IP INITIAL SETTING (1) TCP/IP SETTING 1) Input Master password to enter main screen. © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 5...
  • Page 137 SW Installation 2) Select “CUSTOMER SETUP” menu. 3) Select “SELECT PROCESSOR” menu. Appendix-6 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 138 5) Select “TCP/IP” menu and message in the COMMUNICATION box will be changed from DIALUP to TCP/IP. 6) Click ‘CANCEL’ button and SELECT PROCESSOR screen will be back. 7) Select “MESSAGE FORMAT” menu in the SELECT PROCESSOR screen. © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 7...
  • Page 139 9) Select “TCPIP TYPE” menu in the SELECT HOST screen. 10) Set “STANDARD” in the TCP/IP TYPE menu and set DISABLE in the SSL EN/DISABLE menu. Click ‘CANCEL’ button to go SELECT screen. Appendix-8 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 140 13) Set “DHCP EN/DISABLE” as DISABLE to activate buttons related with “STATIC IP” 14) Select “IP ADDRESS”, “GATEWAY”, “SUBNET MASK” and “DNS” and set the input values individually. 15) Select “HOST SETUP” menu in the OP MAIN screen. © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 9...
  • Page 141 NUMBER 2” in the HOST ADDRESS screen and set input values individuallly. 19) After finishing all setting up, “CANCEL” on the pinpad in the main screen. Then ATM will be rebooted automatically with the “REBOOTING” message shown. Appendix-10 © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 142: Appendix B. Transaction Screen Flow

    ► This chapter shows you the demonstration screen. Transaction Process AP Main ► This is a main AP screen and the customer can start to do transaction by inserting and quickly removing the card on card reader. © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 11...
  • Page 143 SW Installation Select Language ► Language a customer would like to use in transaction can be selected in this screen. Enter PIN ► This screen is to enter PIN of customer's card Appendix-12 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 144 ► This screen is to select transaction type the customer wants to transact such as withdrawal, balance inquiry and transfer is selected in this screen. 1) WITHDRAWAL: FEE NOTICE This screen is to show a customer the information of surcharge. © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 13...
  • Page 145 This screen is to ask a customer if he/she wants to get the receipt or not. 3) WITHDRAWAL: SELECT ACCOUNT (Checking, Saving, Credit Card) This screen is to ask a customer where he/she wants to withdraw in checking, saving, credit card Appendix-14 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 146 This screen is to select the amount of withdrawal. If there is not any amount to withdraw, please select the “OTHER” key and can input the amount the customer would like to withdraw. © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 15...
  • Page 147 5) WITHDRAWAL: CONNECTING HOST This screen is to show the customer that the transaction is in progress. 6) WITHDRAWAL: DISPENSING MONEY This screen is to show the customer that his/her request amount is being dispensed. Appendix-16 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 148 8) TRANSFER: SELECT RECEIPT PRINTING OR NOT This screen is to ask a customer if he/she gets the receipt or not. © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 17...
  • Page 149 This screen is to ask a customer where he/she wants to transfer from; checking, saving, credit card 10) TRANSFER: SELECT ACCOUNT TO TRANSFER TO This screen is to ask a customer where he/she wants to transfer to; checking, saving, credit card Appendix-18 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 150 11) TRANSFER: ENTER TRANSFER AMOUNT This screen is to enter the amount of transfer. 12) TRANSFER: PRINTING TRANSACTION This screen is to show the customer that it is printing transaction results. © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 19...
  • Page 151 This screen is to ask a customer if he/she wants to get the receipt or not. 14) INQUIRY: SELECT ACCOUNT TO INQUIRE This screen is to ask a customer which account he/she wants to inquire Appendix-20 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 152 SW Installation 15) INQUIRY: PRINTING TRANSACTION This screen is to show the customer that it is printing transaction results. © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 21...
  • Page 153 ► This screen to select transaction type the customer wants to transact such as withdrawal, balance inquiry and transfer is selected in this screen. 1) WITHDRAWAL: FEE NOTICE This screen is to show a customer the information of surcharge. Appendix-22 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 154 This screen is to ask a customer if he/she wants to get the receipt or not. 3) WITHDRAWAL: SELECT ACCOUNT This screen is to ask a customer where he/she wants to withdraw in checking, saving, credit card © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 23...
  • Page 155 This screen is to select the amount of withdrawal. If there is not any amount to withdraw, Please select the “OTHER” key and can input the amount a customer would like to withdraw. Appendix-24 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 156 This screen is to show the customer that the transaction is in progress. 6) WITHDRAWAL: DISPENSING MONEY This screen is to show the customer that his/her request amount is being dispensed © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 25...
  • Page 157 8) TRANSFER: SELECT RECEIPT PRINTING OR NOT This screen is to ask a customer if he/she wants to get the receipt or not. Appendix-26 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 158 This screen is to ask a customer where he/she wants to transfer from; checking, saving, credit card 10) TRANSFER: SELECT ACCOUNT TO TRANSFER TO This screen is to ask a customer where he/she wants to transfer to; checking, saving, credit card © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 27...
  • Page 159 SW Installation 11) TRANSFER: ENTER TRANSFER AMOUNT This screen is to enter the amount of transfer. 12) TRANSFER: PRINTING TRANSACTION This screen is to show the customer that it is printing transaction results. Appendix-28 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 160 This screen is to ask a customer if he/she wants to get the receipt or not. 14) INQUIRY: SELECT ACCOUNT TO INQUIRE This screen is to ask a customer which account he/she wants to inquire © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 29...
  • Page 161 SW Installation 15) INQUIRY: PRINTING TRANSACTION This screen is to show the customer that it is printing transaction results. Appendix-30 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 162 ► This screen is to select transaction type customer wants to transact such as withdrawal, balance inquiry and transfer is selected in this screen. 1) WITHDRAWAL: FEE NOTICE This screen is to show a customer the information of surcharge. © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 31...
  • Page 163 This screen is to ask a customer if he/she wants to get the receipt or not. 3) WITHDRAWAL: SELECT ACCOUNT This screen is to ask a customer where he/she wants to withdraw in checking, saving, credit card Appendix-32 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 164 This screen is to select the amount of withdrawal. If there is not any amount to withdraw, Please select the “OTHER” key and can input the amount the customer would like to withdraw. © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 33...
  • Page 165 5) WITHDRAWAL: CONNECTING HOST This screen is to show the customer that the transaction is in progress. 6) WITHDRAWAL: DISPENSING MONEY This screen is to show the customer that his/her request amount is being dispensed Appendix-34 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 166 8) TRANSFER: SELECT RECEIPT PRINTING OR NOT This screen is to ask a customer if he/she wants to get the receipt or not. © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 35...
  • Page 167 This screen is to ask a customer where he/she wants to transfer from; checking, saving, credit card 10) TRANSFER: SELECT ACCOUNT TO TRANSFER TO This screen is to ask a customer where he/she wants to transfer to; checking, saving, credit card Appendix-36 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 168 11) TRANSFER: ENTER TRANSFER AMOUNT This screen is to enter the amount of transfer. 12) TRANSFER: PRINTING TRANSACTION This screen is to show the customer that it is printing transaction results. © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 37...
  • Page 169 This screen is to ask a customer if he/she wants to get the receipt or not. 14) INQUIRY: SELECT ACCOUNT TO INQUIRE This screen is to ask a customer which account he/she wants to inquire Appendix-38 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 170 SW Installation 15) INQUIRY: PRINTING TRANSACTION This screen is to show the customer that it is printing transaction results. © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 39...

  • Page 171: Appendix C. Supported Usb Memory And Hub

    (VID:0x0951) (PID:0x1603) USB Mass Storage Device 512MB (VID:0x3538) (PID:0x0042) LEXAR Media JD FIREFLY (VID:0x05DC) (PID:0A560) USB Driver (VID:0x090C) (PID:0x1000) Memorex TD Classic 003B (VID:0x12F7) (PID:0x1A00) VID: Vendor ID, PID : Product ID Appendix-40 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 172 1) SANDisk 512MB is not supported because it has 2 file systems. (CDFS and FAT) 2) Sony Storage Media is supported because it is FAT, 1 driver and 512 MB size. © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 41...

  • Page 173: Supported Usb Hub Types

    International Inc ys Logics inc) I.Connector(PPA 0x05E3(Genes PPA Int'l 0x0606 4Port HUB) ys Logics inc) 0x05E3(Genes USB 2040 Mini 0x0606 ys Logics inc) 0x05E3(Genes DSP Inc E-Star QU24WR 0x0606 ys Logics inc) Appendix-42 © Nautilus Hyosung, Inc. All Rights Reserved.

  • Page 174: Advertisement & Receipt Header Image Update Guide

    SW Installation Advertisement & Receipt Header Image Update Guide Preparation ► Software Update function in Nautilus Hyosung’s Windows CE Machine is applicable to update advertisement images. ► Supported Image Format The following table describe the supporting format of advertisement image...
  • Page 175 7) If you want to change receipt header image, Copy the receipt header image file. The following picture describe the layout of USB Drive (If you have the master media which get from Nautilus Hyosung, you can see the same layout except “Patch” folder. “Patch” folder is replaced “master” folder.) Appendix-44 ©...

  • Page 176: Execute Updating

    You can update advertisement images by software downloading with MoinView server. Please refer to the MoinView manual for the detail downloading functionality. 1) Press SYSTEM SETUP button. 2) Press SYSTEM CONTROL button. © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 45...
  • Page 177 3) Plug the USB drive in USB slot and press left-top function key, “SOFTWARE UPDATE”. 4) Press left function key, “YES”. When “YES” button is selected, new software in USB drive is transferred to a dedicated directory(ATM) and ATM will start to reboot automatically. Appendix-46 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 178 SW Installation ►Enable Advertisement You can enable or disable Advertisement in the supervisor menu. 1) Press CUSTOMER SETUP button 2) Press “ADVERTISEMENT” button © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 47...
  • Page 179 SW Installation 3) You can enable or disable Advertisement images to view by pressing “SCREEN” Key. Appendix-48 © Nautilus Hyosung, Inc. All Rights Reserved.
  • Page 180 6) If you want to change receipt header image, Copy the receipt header image file. 7) Make comperessed file like the below layout. The following picture describe the layout of Zip file. And you can download the “Patch.zip” using MoniView. © Nautilus Hyosung, Inc. All Rights Reserved. Appendix- 49...