Removing The Locking Section From The Main Body Of Cash & Check In Module - Nautilus Hyosung MONiMAX7600 Installation Manual

Installation Manual
Removing the locking section from the main body of Cash & Check In Module
▶ Escrow Section
▶ Bottom Section
Remove the desiccant attached on the bottom.
1. Move the location of the Red Screw "A" fastened on the Escrow Section.
(Unfasten the Screw "B" and open the cover. After Moving the location of the
Screw "A", fasten the screw "B" again)
2. Move the location of the Screw "C" fastened on the Body Section.
Moving the location of the screw fixing the guide on Escrow Section
▶ Transport Section of BM2
Disassemble the green screw.
Removing the screw fixing the transport section of BM2
© 2011 Nautilus Hyosung Inc. All Rights Reserved.
Appendix
A-2