Table of Contents
Advertisement
Installation Manual
Chapter 4. System Installation
Unpacking the ATM
▶ Unpack the machine on top of the palette.
1. Cut the straps that are fastened around the box with a knife.
2. Use an appropriate tool to remove the nails from the palette. (Refer to figure below)
3. Remove the lid, then box from the top. Do not discard the packaging materials until you have
4. Verify the contents carefully with the packing list to be sure all items listed are included. Notify
5. If only the palette needs to be removed, lift the whole machine from the bottom and set it
(Be careful when cutting the straps. Refer to figure below.)
verified any shipping damage claim. Contact your distributor immediately if you see any
shipping damage. Store the box in a safe place to re-use or discard of appropriately.
your distributor of any shortages.
aside.
© 2011 Nautilus Hyosung, Inc. All Rights Reserved.
Chapter4. System Installation
4-1
Advertisement
Table of Contents
