Operator Function; Password For Entering Supervisor Mode - Nautilus Hyosung MX5300 Operator Function

Operator Function

Password For Entering Supervisor Mode

► All MoniMax machines use Operator Function. But the way to enter Supervisor mode is
different depending on the Supervisor device type.)
If using front screen, you should press the ENTER, CLEAR, CANCEL 1,2 and 3 keys in
order.
In case of using T-SPL, to enter Supervisor mode, input 66 option on T-SPL after
changing convert switch located on the rear of ATM from IN SERVICE to
SUPERVISOR status, as shown in below picture,
Lastly, if using H-SPL, to enter Supervisor mode, just input 66 option on H-SPL.
Please press entry key ("ENTER, CLEAR, CANCEL, 1, 2 and 3" or "66") on pinpad or
SPL device so that you can see password screen to input password.
The default password is "555555"(6 digits). The default password is changeaible in
Supervisor mode. After inputting correct exact password of 4~6 digit, press CONFRIM
key in order to enter Supervisor main menu. Pressing CLEAR key erases the input
number and pressing CANCEL key goes to Application mode.
Depending on authority, there are three kinds of default password like below table.
Authority
OPERATOR
SERVICE
MASTER
© 2009 Nautilus Hyosung Inc. All Rights Reserved.
Default Password
111111 (6 digits)
222222 (6 digits)
555555 (6 digits)
Operator Function
1