SATATYA Professional Bullet IP-Camera
The Persistent Vision
Safety Instructions
These instructions are intended to ensure that the user can
use the product correctly to avoid danger or property loss.
Cautions
•
Ensure that the power supply voltage is correct before using
the camera.
•
Avoid placing cables too close to magnetic or high voltage
devices, to reduce undesirable image noise.
•
Do not touch sensor modules with fingers. For cleaning use
'clean cloth' and wipe it gently.
•
Do not mount the camera with the lens facing the sun or bright
light to prevent damage to the sensor.
•
Do not expose the camera to temperatures below or beyond its
operating temperature.
•
Do not mount the camera near a radiator or a heater.
Warning
•
In the use of the product, you must be in strict compliance with
the electrical safety regulations of the region and nation.
•
Do not connect several devices to one power adapter as it may
cause over-heating or fire hazard.
•
If smoke, odour or noise rise from the device, turn off the
power at once and unplug the power cable, and contact the
nearest service center.
•
To prevent electrical shock, turn off power supply before
making electrical connections.