Table of Contents
Advertisement
Figure 4
Pivot Joint
Socket screws
Base Plate
Figure 5
LED: CLASS1 (Category RS1)
Never look at the transmit laser while the power is on. Never
look directly at the fiber ports and the fiber cable ends when
they are powered on.
Use of controls or adjustment to the performance or procedure
other than those specified herein may result in hazardous laser
emission.
13
Allen Key
Camera body
Step 6: Connecting Cables
•
Connect the Ethernet cable to LAN port and Power cable to the
12V DC power supply.
•
In Premium variants, connect the Audio I/O cables if required.
1. You can connect the Audio Input device such as Mike to the
Audio Input cable of the camera. The audio when enabled will be
recorded with the video and will be available at the monitoring
location.
2. You may connect the Audio Output device such as earphone or
speaker to the Audio Output cable of the camera. This will
generate audio received from the network.
Ethernet
12V DC @2A
If devices such as Mike and Speaker can be connected to
Audio IN and Audio OUT, you may need to connect an external
power source if their power requirements are not fulfilled with
the camera adapter.
Audio IN
Audio Out
14
Advertisement
Table of Contents
