Rear Hard Top Removal - Jeep 2008 Wrangler Owner's Manual

3. Reinstall panel(s) using the same steps for removal in
reverse order.

Rear Hard Top Removal

1. Remove both front panels. Refer to "Front Panel(s)
Removal" in this section.
2. Open both doors.
3. Remove the two Torx head screws that secure the
hard top at the B-pillar (near top of door) using a #40
Torx head driver (4–Door Only).
4. Remove the six Torx head screws that secure the hard
top to the vehicle (along the interior bodyside) using a
#40 Torx head driver.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129
5. Open swing gate all the way to ensure clearance of the
rear window glass. Lift rear window glass.
3