Lights-On Reminder; Headlight Dimmer Switch - Jeep 2008 Wrangler Owner's Manual

98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
NOTE: Lens fogging can occur under certain atmo-
spheric conditions. This will usually clear as atmospheric
conditions change to allow the condensation to change
back into a vapor. Turning the lamps on will usually
accelerate the clearing process.
Headlight Switch
To change the brightness of the instrument panel lights,
rotate the center portion of the multifunction control
lever up or down.
NOTE: If the driver's door is left open, and the head-
lights or parking lights are left on, the High Beam
Indicator Light will remain illuminated and a chime will
sound.

Lights-On Reminder

If the headlights or parking lights are on after the ignition
is turned off, a chime will sound when the driver's door
is opened.

Headlight Dimmer Switch

Push the multifunction control lever away from you to
switch the headlights to high beam. Pull the lever to-
wards you to switch the headlights back to low beam.