Door Frame Installation (Two-Door Models) - Jeep 2008 Wrangler Owner's Manual

134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Door Frame Installation (Two-Door Models)

1. Unfold door frame and unscrew thumbscrews.
2. Set the door frame pin into the hole on top of the body
side, behind the door opening.
3. After the door frame pin has been set into the body
side hole, carefully set the front of the door frame into the
rubber seal at the top of the windshield.
4. Starting with the front of the door frame, clip it over
the metal side bar and then clip the rear, making sure that
the material for the side bar covers is not pinched by the
door frame.