Memory Position Recall; Easy Entry/Exit Seat (Available With Memory Seat Only) - Jeep 2008 Liberty Owner's Manual

NOTE: Your transmitters can be unlinked to the
memory setting by pressing the Set (S) button followed
by the Unlock button on the transmitter in Step 4 above.

Memory Position Recall

NOTE:
• For vehicles equipped with an automatic transmission,
the vehicle must be in "P" (Park) to recall memory
positions. If a recall is attempted when the vehicle is
not in "P" (Park), a message will display in the EVIC,
if equipped.
• For vehicles equipped with a manual transmission, the
vehicle speed must be at 0 mph (0 km/h) to recall
memory positions. If a recall is attempted with the
vehicle speed above 0 mph (0 km/h), a message will
display in the EVIC, if equipped.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129
To recall the memory settings for driver one, press
memory button number 1 or the Unlock button on the
RKE transmitter linked to memory position 1.
To recall the memory setting for driver two, press
memory button number 2 or the Unlock button on the
RKE transmitter linked to memory position 2.
A recall can be cancelled by pressing any of the memory
buttons (S, 1, or 2) during a recall. When a recall is
cancelled, the driver seat and side mirrors will stop
moving. A delay of one second will occur before another
recall can be selected.
Easy Entry/Exit Seat (Available with Memory Seat
Only)
This feature provides automatic driver seat positioning to
enhance driver mobility when entering and exiting the
vehicle.
3