Jeep 2008 Liberty Owner's Manual page 199

the air conditioner is on, turn it off. Also, shift the
transmission into "N" (Neutral) and idle the vehicle. If
the needle remains on the "H" mark, turn the engine off
immediately and call for service. (See page 384 for more
information.)
NOTE: The gauge pointer will remain near its last
reading when the engine is turned off. It will return to a
true reading when the engine is restarted.
CAUTION!
Do not leave your vehicle unattended with the en-
gine running, as you would not be able to react to the
temperature indicator if the engine overheats.
INSTRUMENT PANEL AND CONTROLS 199
24. Transmission Temperature Warning Light — If
Equipped
This light indicates that the transmission fluid
temperature is running hot. This may occur
with severe usage, such as trailer towing. If this
light turns on, safely pull over and stop the
vehicle. Then, shift the transmission into "N" (Neutral)
and run the engine at idle or faster until the light turns
off.
25. Trip Odometer Button
Changing the Display
Press and release this button once to change the display
from odometer to "Trip A." Press and release it again to
change the display from "Trip A" to "Trip B." On vehicles
equipped with a Base Cluster, press and release it once
again to display the outside temperature. On vehicles
equipped with a Mid Line Cluster, press and release it
4