Jeep 2008 Liberty Owner's Manual page 217

details. For vehicles equipped with sales code RER radio,
refer to your "Navigation User's Manual" for UCon-
nect™ system operating instructions.
Lock Doors Automatically at 15 mph (24 km/h)
When ON is selected, all doors will lock automatically
when the vehicle reaches a speed of 15 mph (24 km/h).
To make your selection, press and release the FUNC-
TION SELECT button until "ON" or "OFF" appears.
Unlock Doors Automatically on Exit
When ON is selected, all doors will unlock when the
vehicle is stopped and the transmission is in the "P"
(Park) or "N" (Neutral) position and the driver's door is
opened. To make your selection, press and release the
FUNCTION SELECT button until "ON" or "OFF" ap-
pears.
Remote Key Unlock
When Driver Door 1st Press is selected, only the driver's
door will unlock on the first press of the remote keyless
INSTRUMENT PANEL AND CONTROLS 217
entry unlock button. When Driver Door 1st Press is
selected, you must press of the remote keyless entry
unlock button twice to unlock the passenger's doors.
When All Doors 1st Press is selected, all of the doors will
unlock on the first press of the remote keyless entry
unlock button. To make your selection, press and release
the FUNCTION SELECT button until "Driver Door 1st
Press" or "All Doors 1st Press" appears.
Recall Memory with Remote Key Unlock — If
Equipped
When ON is selected, you can use your Remote Keyless
Entry Transmitter to recall one of two pre-programmed
memory profiles. Each memory profile contains desired
position settings for the driver seat, side mirror, adjust-
able pedals (if equipped), and power tilt and telescopic
steering column (if equipped), and a set of desired radio
station presets. When OFF is selected, only the memory
switch on the driver's door panel will recall memory
profiles. To make your selection, press and release the
4