Memory Position Recall; Seats; Manual Adjustment (Front Seats) - If Equipped - Jeep COMPASS 2020 Owner's Manual

30 GETTING TO KNOW YOUR VEHICLE
3. Push and release the set (S) button on the
memory switch, then within five seconds
push and release the button labeled (1) or
(2) accordingly. "Memory Profile Set" (1 or
2) will display in the instrument cluster
display.
4. Push and release the lock button on the key
fob within 10 seconds.
NOTE:
Your key fob can be unlinked to your memory
settings by pushing the set (S) button, followed
by pushing the unlock button on the key fob
within 10 seconds.

Memory Position Recall

NOTE:
The vehicle must be in PARK (P) to recall
memory positions. If a recall is attempted when
the vehicle is not in PARK, a message will
display in the instrument cluster display.
To recall the memory settings for driver one or
two, push the desired memory button number
(1 or 2) or the unlock button on the key fob
linked to the desired memory position.
A recall can be canceled by pushing any of the
memory buttons (S, 1, or 2) during a recall.
When a recall is canceled, the driver seat will
stop moving. A delay of one second will occur
before another recall can be selected.

SEATS

Seats are a part of the Occupant Restraint
System of the vehicle.
WARNING!
It is dangerous to ride in a cargo area,

inside or outside of a vehicle. In a collision,
people riding in these areas are more likely
to be seriously injured or killed.
Do not allow people to ride in any area of

your vehicle that is not equipped with seats
and seat belts. In a collision, people riding
in these areas are more likely to be seri-
ously injured or killed.
Be sure everyone in your vehicle is in a seat

and using a seat belt properly.
Manual Adjustment (Front Seats) — If
Equipped
Manual Front Seat Forward/Rearward
Adjustment
On models equipped with manual seats, the
adjusting bar is located at the front of the seats,
near the floor.
Front Seat Adjustment