Oce 7050 Technical & Service Manual page 156

Mount the earth of the bundle to the bottom plate (Z-1205-01).
4
Connect the two connectors of the bundle to the connectors of the heater assy.
5
Only in case of a manual roll unit break plate A out of the heater assy.
6
Loosen the screws of the cover plate.
7
Mount the two bolts with washers in the heater assy (not fixed).
8
For a manual roll unit and a 1 roll unit mount the heater assy with the bolts in
9
the slotted holes of the bottom plate and fix the plate of the heater assy.
For a 2 roll unit mount the heater assy with the bolts in the slotted holes of the
10
rear plate and fix the plate of the heater assy.
There should be no play between the rear plate and the heater assy
Note:
plate).
Fix the cover plate on top of the heater assy also against the rear plate (play
11
between cover plate and heater assy is 6 mm).
ed. 6 12 Paper roll feed 403