Mounting The Fusing Ntc's - Oce 7050 Technical & Service Manual

Disassembly
Caution:
switch 08S2) the main voltage is connected to the heaters.

1 Mounting the fusing NTC's

In the middle two lamellas of the heater is a gap for mounting the NTC's.
I
Put the NTC tubes in the gap until they hit the stop.
1
Make sure that the wiring does not contact the lamellas of the heater.
I
Connect the connector.
2
ed. 6
When you bridge the fuser safety switch 08S1 (USA also fuser safety
stop
08 Fusing 401