Stand Installation - Oce 7050 Technical & Service Manual

2 Stand installation

Put the support-assy 'A' and 'B' on the floor.
1
Mount 2 hexagon washer bolts (M4x12) in holes 'C' from the support assys
2
'A' and 'B'.
Mount the plate assy 'D'. (Hook the slotted holes over screws 'C').
3
Hand tight the plate assy 'D' with 6 hexagon washer bolts (M4x12) in holes
4
'E' at the rear side.
Mount the screws 'F' and 'G' (both sides) hand tight.
5
Mount shelf 'H' over the screws.
6
Mount the screws 'I' and 'J' (both sides) hand tight.
7
Mount shelf 'K' over the screws.
8
Place the basic machine on the support-assys 'A' and 'B'.
9
Fix the machine with 2 hexagon washer bolts (M4x12) at the front in holes 'L'
10
and 2 hexagon bolts (M4x8) with washer and star washer in holes 'M' under-
neath at the rear.
Tighten all the screws.
11
ed. 6 Installation 7